GB/Z 168-2026Large capacity fully wrapped carbon fiber reinforced gas cylinders with plastic liners for compressed hydrogen (English PDF)
大容积塑料内胆碳纤维全缠绕压缩氢气瓶
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 168-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 27, 2026
Implementation date
February 27, 2026
Scope
GB/Z 168-2026 is the English-translated version of 大容积塑料内胆碳纤维全缠绕压缩氢气瓶.
GB/Z 168-2026 is the Chinese standard "Large capacity fully wrapped carbon fiber reinforced gas cylinders with plastic liners for compressed hydrogen".
Its scope clause reads: This document specifies the types, models, and technical requirements of large-capacity plastic-lined carbon fiber fully wound compressed hydrogen cylinders (hereinafter referred to as "cylinders").
Requirements, test methods, inspection rules, as well as installation and protection, marking, electronic tags, packaging, transportation and storage requirements.
This document applies to applications with ambient temperatures ranging from -40°C to 60°C, nominal working pressure not exceeding 55MPa, and nominal volume not less than [amount missing].
A mobile, fully wrapped carbon fiber gas cylinder with a plastic liner, capable of being refilled with hydrogen, with a capacity of 450L and not exceeding 3000L.
Found what you need?
Document preview — GB/Z 168-2026
National Standard of the People's Republic of China
- ICS
- 23.020.30
- Classification
- J 74
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions, Symbols
- 4.Types and Models
- 5 Technical Requirements
- 6.Test Methods
- 7.Inspection Rule
- 8 Installation and Protection
- 9.Marking, electronic tags, packaging, transportation and storage
- 10 Product Certificates and Batch Inspection Quality Certificates
- Appendix A (Normative) Performance Evaluation Method for O-rings for Gas Cylinders
- Appendix B (Informative) Calculation Method for Safety Factor of Straight Thread Shear Stress
- Appendix C (Normative) Interlaminar Shear Test Method
- References
1 Scope
This document specifies the types, models, and technical requirements of large-capacity plastic-lined carbon fiber fully wound compressed hydrogen cylinders (hereinafter referred to as "cylinders").
Requirements, test methods, inspection rules, as well as installation and protection, marking, electronic tags, packaging, transportation and storage requirements.
This document applies to applications with ambient temperatures ranging from -40°C to 60°C, nominal working pressure not exceeding 55MPa, and nominal volume not less than [amount missing].
A mobile, fully wrapped carbon fiber gas cylinder with a plastic liner, capable of being refilled with hydrogen, with a capacity of 450L and not exceeding 3000L.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 191 Packaging and Storage Graphic Symbols
GB/T 196 Basic Dimensions of Ordinary Threads
GB/T 228.1 Metallic materials - Tensile testing - Part 1.Test method at room temperature
GB/T 229 Metallic materials Charpy impact test method
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber
GB/T 533-2008 Determination of density of vulcanized rubber or thermoplastic rubber
GB/T 1040.1 Determination of tensile properties of plastics - Part 1.General principles
GB/T 1220 Stainless Steel Bars
GB/T 1458 Test Method for Mechanical Properties of Fiber-Wound Reinforced Composite Materials in Ring Specimens
GB/T 1633-2000 Determination of Vicat softening temperature (VST) of thermoplastics
GB/T 1636 Determination of apparent density of plastics that can flow out of a specified funnel
GB/T 1677 Determination of epoxy value of plasticizers
GB/T 2941-2025 General Procedures for Specimen Preparation and Conditioning in Physical Testing Methods for Rubber
GB/T 3190 Chemical composition of wrought aluminum and aluminum alloys
GB/T 3191 Aluminum and Aluminum Alloy Extruded Bars
GB/T 3362 Tensile Properties Test Method for Carbon Fiber Multifilament
GB/T 3452.2 O-rings for hydraulic and pneumatic applications - Part 2.Inspection specifications for appearance quality
GB/T 3512 Accelerated aging and heat resistance test of vulcanized rubber or thermoplastic rubber in hot air
GB/T 3634.1 Hydrogen - Part 1.Industrial Hydrogen
GB/T 3634.2 Hydrogen - Part 2.Pure Hydrogen, High-Purity Hydrogen and Ultra-Purity Hydrogen
GB/T 3682.1-2018 Plastics. Thermoplastics - Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR)
Determination Part 1.Standard Method
GB/T 3934 Technical Requirements for General Thread Gauges
GB/T 4612 Determination of epoxy equivalent in plastic epoxy compounds
GB/T 5720 Test Methods for O-rings
GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 196General purpose metric screw threads - Basic dimensions
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 229Metallic Materials — Charpy Pendulum Impact Test Method
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 533-2008Rubber, vulcanized or thermoplastic -- Determination of density
Similar standards
How to Download GB/Z 168-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.1-2018 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.1-2025 — Plastics - Determination of tensile properties - Part 1: General principles
GB/Z 168-2026
$545.00