Valid

GB/T 9339-2014Reactive dyes—The linkage between the dyes and the cellulosic fibers—Determination of the acidic or basic hydrolizing properties (English PDF)

反应染料 染料与纤维素纤维结合键 耐酸耐碱性的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 9339-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 8, 2014

Implementation date

December 1, 2014

Scope

GB/T 9339-2014 is the English-translated version of 反应染料 染料与纤维素纤维结合键 耐酸耐碱性的测定.

GB/T 9339-2014 is the Chinese test method for how well the bond between a reactive dye and cellulosic fibre stands up to acid and alkali.

A dyed sample is held in an acid or alkaline bath at a set temperature, time and liquor ratio, then assembled with an adjacent fabric, and the colour change of the sample and the staining of the adjacent fabric are rated against grey scales or measured on an instrument.

The reagents and materials are acetic acid at 10 g/L, anhydrous sodium carbonate at 2 g/L and adjacent fabrics of cotton to GB/T 7568.2-2008 and polyamide to GB/T 7568.3-2008, each piece 10 cm by 4 cm; this edition added colour measurement to the rating and reworked the test report.

It replaces GB/T 9339-2006, was issued on 8 July 2014 and has applied since 1 December 2014.

Found what you need?

Document preview — GB/T 9339-2014

National Standard of the People's Republic of China

ICS
71.100.01; 87.060.10
Classification
G 55
Replacing
GB/T 9339-2006

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 4 Reagents and materials
  • 5 Apparatus

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 9339-2006 "Dye reaction with the cellulose fibers bond to acid and alkali resistance measurement", and GB/T 9339-2006 compared to the main technical changes are as follows.

--- Updated and increased the reference standard (see Chapter 2, Section 2 of the 2006 edition);

--- Rating content increases the color measurement (see 6.4.2);

--- Modify the content of the test report (see Chapter 7, Chapter 7, 2006 edition). The standard proposed by China Petroleum and Chemical Industry Association.

1 Scope

This standard specifies the method for measuring the reaction of alkali dye and the cellulosic fibers bond acid.

This standard applies to the reactive dyes and cellulose fiber bonds acid and alkali resistance measurement.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 250 textile color fastness test assessing change in color like the gray card

GB/T 251 Textiles Tests for color fastness - Grey scale for assessing staining card General conditions

GB/T 2374-2007 Determination of dyes provisions Determination of

GB/T 2387 Reaction dye shade and intensity

GB/T 4841.1 standard depth dyeing color card 1/1

GB/T 7568.2-2008 Textiles Tests for color fastness standard adjacent fabrics - Part 2.

GB/T 7568.3-2008 Textiles Tests for color fastness standard adjacent fabrics - Part 3. polyamide fibers

FZ/T 01023-1993 degree of staining of adjacent fabrics instrument rating methodology

FZ/T 01024-1993 discoloration degree of sample instrument rating methodology Principle 3 The dyeing at a certain temperature, time, dip the finished base solution at a predetermined ratio of the acid-bath, and then paste the lining fabric staining test Inspection, evaluation or measurement sample color discoloration and staining extent adjacent fabric of instruments like the gray card, which assessed the dye and the cellulosic fibers Acid and alkali resistance bond.

4 Reagents and materials

The reagents used should be consistent with GB/T 2374-2007 the provisions of Chapter 3. Reagents and materials covered by this standard are as follows.

a) acetic acid. 10g/L solution;

b) anhydrous sodium carbonate. 2g L solution /;

c) cotton adjacent fabric. comply with GB/T 7568.2-2008, each block size is 10cm × 4cm;

d) polyamide adjacent fabric. comply with GB/T 7568.3-2008, each block size is 10cm × 4cm.

The equipment shall comply with GB/T 2374-2007 in Chapter 4.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 9339

EditionTitleRevisionStatus
GB/T 9339-2014Reactive dyes—The linkage between the dyes and the cellulosic fibers—Determination of the acidic or basic hydrolizing propertiescurrent editionCurrent
GB/T 9339-2006Reactive dyes—The linkage between the dyes and the cellulosic fibers—Determination of the acidic or basic hydrolizing propertiesprevious editionSuperseded

This page sells the current edition, GB/T 9339-2014. Earlier editions are listed for reference only.

How to Download GB/T 9339-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 9339-2014

$85.00