GB/T 8924-2005Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method (English PDF)
纤维增强塑料燃烧性能试验方法 氧指数法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8924-2005 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 18, 2005
Implementation date
December 1, 2005
Scope
GB/T 8924-2005 is the English-translated version of 纤维增强塑料燃烧性能试验方法 氧指数法.
GB/T 8924-2005 is the Chinese national standard covering test method for flammability characteristics of fiber reinforced plastics-Oxygen index method. It was issued on 18 May 2005 and has been in force since 1 December 2005, replacing GB/T 8924-1988.
The document is under the responsibility of the China Building Materials Federation. This page is published from the official record of the 2005 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 8924-2005
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
- Replacing
- GB/T 8924-1988
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Term and Definitions
- 4 Principle
- 5 Test Devices
- 6 Sample
- 7 Test Procedure
- 8 Oxygen Index Calculation
- 9 Test Result
1 Foreword
GB/T 8924-2005 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 18 May 2005 and has been in force since 1 December 2005.
It replaces the earlier edition GB/T 8924-1988.
This standard specifies the test device, test procedure and result calculation of the test methods of flammability characteristics of fiber reinforced plastics.
This standard is applicable to the measurement of glass fiber reinforced plastics and carbon fiber reinforced plastics by oxygen index method.
This standard is only applicable to evaluate the flammability characteristics of materials under conditions specified in this standard. It cannot be used to evaluate the fire risk of materials under actual service conditions and is not applicable to evaluate materials which have high shrinkage after heating.
2 Scope Preview
GB/T 8924-2005 falls under ICS 83.120, in the field of rubber and plastics industries.
This catalogue holds 1,917 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 8924-2026 (later edition)
GB/T 8924-1988 (earlier edition)
Standards on related subjects:
GB/T 3854-2017 — Test method for hardness of reinforced plastics by means of a Barcol impresser
GB/T 2567-2008 — Test methods for properties of resin casting body
GB/T 2577-2005 — Test method for resin content of glass fiber reinforced plastics
GB/T 3139-2026 — Test methods for the thermal conductivity of fibre reinforced plastics
GB/T 1463-2026 — Test methods for the density and relative density of fibre reinforced plastics
5 Classification and status
International classification (ICS): 83.120
Chinese Standard Classification (CCS): Q 23
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 24719-2025Toll booth of highway
- GB/T 8237-2025Liquid unsaturated polyester resin for fiber reinforced plastics
- GB/T 15568-2024Sheet molding compound (SMC) for general purposes
- GB/T 24718-2023Anti-glare board
- GB/T 24721.1-2023Glass fiber reinforced plastic product for highway - Part 1: General rule
- GB/T 40514-2021Electrostatic precipitator
Similar standards
Editions of GB/T 8924
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8924-2005 | Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method | current edition | Current |
| GB/T 8924-1988 | Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method | previous edition | Superseded |
This page sells the current edition, GB/T 8924-2005. Earlier editions are listed for reference only.
How to Download GB/T 8924-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 8924-2005
$75.00