GB/T 8054-2008Single sampling procedures and tables for Inspection having desired operating Characteristics by variables (English PDF)
计量标准型一次抽样检验程序及表
This is a limited preview
Buy now to download the full PDF (36 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8054-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 16, 2008
Implementation date
January 1, 2009
Scope
GB/T 8054-2008 is the English-translated version of 计量标准型一次抽样检验程序及表.
GB/T 8054-2008 is the Chinese standard "Single sampling procedures and tables for Inspection having desired operating Characteristics by variables". Its scope clause reads: This standard specifies the ratio of the mean and defective quality indicators measurement standard sampling inspection procedures and implementation.
This standard applies to product quality characteristics measured value representation and subject to inspection or approximately normally distributed. This standard specifies the production side risk alpha = 0.05, consumer's risk beta = 0.10. Its clauses include terms and definitions, symbols.
Found what you need?
Document preview — GB/T 8054-2008
National Standard of the People's Republic of China
- ICS
- 03.120.30
- Classification
- A 41
- Replacing
- GB/T 8054-1995
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, symbols
- 3.1 Terms and definitions
- 3.2 Symbols
- 4 in mean quality index sampling
- 4.1 sampling program
- 4.2 implementation of sampling test
- 4.3 Example 6 to determine the sampling plan
- 4.4 Sampling Table
- 5 substandard product sampling rate of 19 quality indicators
- 5.2 implementation of sampling test
- 5.3 Application Examples
- 5.4 Sampling Table
- Appendix A (normative) Product quality is stable or not testing methods
- Annex C (informative) characteristics of the sampling function (with a mean of quality indicators)
- Annex D (informative) characteristics of the sampling function (with nonconforming rate quality indicators)
1 Scope
This standard specifies the ratio of the mean and defective quality indicators measurement standard sampling inspection procedures and implementation.
This standard applies to product quality characteristics measured value representation and subject to inspection or approximately normally distributed.
This standard specifies the production side risk alpha = 0.05, consumer's risk beta = 0.10.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4091 conventional control charts (GB/T 4091-2001, idt, ISO 8258.1991)
Analyzing and processing GB /statistical processing and interpretation of normal sample values T 4883 data
GB/T 19000-2000 Quality Management System - Fundamentals and vocabulary (idt ISO 9000.2000)
GB/T 10111 random number generation and sampling product quality
ISO 3534-1.2006 statistical terms - Part 1. General statistical terms and terms used in probability
ISO 3534-2.2006 statistical terms - Part 2. Applied Statistics
3 Terms and definitions, symbols
ISO 3534-1.2006, ISO 3534-2.2006 and GB/T 19000-2000 determine the terms, definitions and symbols as well as following surgery
Language, definitions and symbols apply to this standard.
3.1 Terms and Definitions
3.1.1
Required for the implementation of inspection and sampling of the product division of the basic unit.
3.1.2
For the implementation of sampling and brought together a group of products. (Abbreviation. Batch)
3.1.3
Unit Features subject of continuous scales can measure quality characteristics.
3.1.4
Predetermined sampling plan from the batch randomly selected a certain number of units of product. Acquire their mass by measuring, testing or other methods
The amount of characteristic values, compared with the quality requirements, the batch process and determine whether the product received.
3.1.5
According to the test results of samples from a batch extraction, decide whether to accept the batch.
[ISO 3534-2.2006,4.4] […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.
Referenced standards
Cited by
Similar standards
Editions of GB/T 8054
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8054-2008 | Single sampling procedures and tables for Inspection having desired operating Characteristics by variables | current edition | Current |
| GB/T 8054-1995 | Single sampling procedures and tables for Inspection having desired operating Characteristics by variables | previous edition | Superseded |
This page sells the current edition, GB/T 8054-2008. Earlier editions are listed for reference only.
How to Download GB/T 8054-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 8054-2008
$560.00