Valid

GB/T 8028-2010Criteria for changing of gasoline engine oil (English PDF)

汽油机油换油指标

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 8028-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

May 1, 2011

Scope

GB/T 8028-2010 is the English-translated version of 汽油机油换油指标.

GB/T 8028-2010 is the Chinese national standard covering criteria for changing of gasoline engine oil. It was issued on 10 January 2011 and has been in force since 1 May 2011, replacing GB/T 8028-1994.

The document is under the responsibility of the Standardization Administration of China. This page is published from the official record of the 2010 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 8028-2010

National Standard of the People's Republic of China

ICS
75.100
Classification
E 34
Replacing
GB/T 8028-1994

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Overview
  • 2.2 Coring device
  • 2.3 Conventional coring system
  • 2.4 Special coring system
  • 2.5 Cable coring
  • 2.6 Directional Coring
  • 2.7 Coring bit
  • 2.8 Characteristics of the drill fluid pumping
  • 2.9 Core claw
  • 3 Terms and Definitions
  • 3.1 Probe
  • 3.2 Core Processing Method
  • 3.3 Site sampling and analysis
  • 4 Method Summary
  • 4.1 Apparatus
  • 4.2 Materials
  • 4.3 Process Manual
  • 4.4 Analysis Manual
  • 5 Significance and Use
  • 5.1 General Requirements
  • 5.2 Project Outline
  • 5.3 Process
  • 5.4 Stationary Equipment
  • 5.5 Rotary Equipment
  • 5.6 Heater
  • 5.7 Plot Plan and Transportation
  • 5.8 Equipment Layout and Piping
  • 5.9 Instrumentation
  • 6 Preparation
  • 6.9 Electric
  • 7 Test Procedures
  • 9 Report

1 Foreword

GB/T 8028-2010 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 10 January 2011 and has been in force since 1 May 2011.

It replaces the earlier edition GB/T 8028-1994, GB/T 8028-1987.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 8028-2010 falls under ICS 75.100, in the field of petroleum and related technologies.

This catalogue holds 836 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 15 pages

4 Related standards

Other editions:

GB/T 8028-2026 (later edition)

GB/T 8028-1994 (earlier edition)

GB/T 8028-1987 (earlier edition)

Standards on related subjects:

GB 11122-2025 — Diesel engine oils

GB 11121-2025 — Gasoline engine oils

GB/T 6538-2022 — Determination of apparent viscosity of engine oils—Using the cold-cranking simulator

GB/T 7607-2026 — Criteria for changing diesel engine oils

GB/T 8022-2019 — Determination of demulsibility characteristics of lubricating oils

5 Classification and status

International classification (ICS): 75.100

Chinese Standard Classification (CCS): E 34

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of GB/T 8028

EditionTitleRevisionStatus
GB/T 8028-2010Criteria for changing of gasoline engine oilcurrent editionCurrent
GB/T 8028-1994Criteria for changing of gasoline engine oilprevious editionSuperseded

This page sells the current edition, GB/T 8028-2010. Earlier editions are listed for reference only.

How to Download GB/T 8028-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 8028-2010

$90.00