GB/T 7701.2-2008Granular activated carbon from coal - Granular activated carbon from coal for water treatment (English PDF)
煤质颗粒活性炭 净化水用煤质颗粒活性炭
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB/T 7701.2-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 20, 2008
Implementation date
May 1, 2009
Scope
GB/T 7701.2-2008 is the English-translated version of 煤质颗粒活性炭 净化水用煤质颗粒活性炭.
GB/T 7701.2-2008 is the part of the GB/T 7701 series that covers granular activated carbon made from coal for water treatment.
It sets the requirements for the product, the inspection rules and the inspection methods, and the provisions on marking, packaging, transport and storage, with three normative annexes giving the measurement of humic acid adsorption, of tannic acid adsorption and of water-soluble substances; the last one is modified from ASTM D 5029.
Water utilities, filter makers and carbon producers use it to specify and accept a batch. It replaces GB/T 7701.4-1997, was issued on 20 November 2008 and has applied since 1 May 2009.
Found what you need?
Document preview — GB/T 7701.2-2008
National Standard of the People's Republic of China
- ICS
- 75.160.10
- Classification
- D 24
- Replacing
- GB/T 7701.4-1997
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope5
- 2 Normative references5
- 3 Requirements6
- 4 Inspection rules6
- 5 Inspection methods9
- 6 Mark, package, transportation, storage10
- Annex A (Normative) Measurement of humic acid absorption11
- Annex B (Normative) Measurement of tannin acid absorption15
- Annex C (Normative) Measurement of water soluble substance19
Foreword
GB/T 7701 Granular activated carbon from coal is divided into.
- Part 1: Granular activated carbon from coal for gas phase;
- Part 2: Granular activated carbon from coal for water treatment;
- Part 3: Granular activated carbon from coal for carrier.
This part is the Part 2 of GB/T 7701.Annex C modifies and adopts ASTM D 5029-1998 Standard test method for water soluble content in activated carbon (re-confirmed in 2004). The main changes are as follows.
- Delete safety term in the Scope;
- Delete sections Quoted references, Terminology, Test method introduction, Meaning and use, and Keywords;
- Delete the examples in result calculation;
- Delete the repeatability requirement in section Precision and deviation.
This part shall replace GB/T 7701.4-1997 Granular activated carbon from coal for water treatment. The main changes are as follows.
- Delete quality classification;
- Formulate indicators for water soluble substance;
- Adsorption of methylene blue in ex-factory inspection items is changed from "inspection item" to "item to be agreed by supplier and purchaser";
- Iodine value is changed to >= 800 mg/g;
- Delete indicator of ash content;
- it no longer stipulates specific technical indicators for pore volume and specific surface area;
- Add measurement of humic acid adsorption in Annex A;
- Add measurement of tannin acid adsorption in Annex B;
- Add measurement of water soluble substance in Annex C.
Annexes A, B and C are normative.
1 Scope
This part specifies the requirements, inspection rules, test methods, mark, package, transportation, and storage etc. for granular activated carbon from coal for water treatment.
This part is applicable to dechlorination, oil removal and purification for industrial water; further purification treatment for drinking water and sewage; and granular activated carbon from coal for water treatment when water source are outbreak-polluted.
2 Normative references
The articles contained in the following documents have become this part of GB/T 7701 when they are quoted herein. For the dated documents so quoted, all the modifications (excluding corrigendum) or revisions made thereafter shall not be applicable to this Standard. For the undated documents so quoted, the latest editions shall be applicable to this Standard.
GB/T 1914 Chemical analytical filter paper
GB/T 6682 Water for analytical laboratory use - Specification and test methods (GB/T 6682-2008, ISO 3696:1987, MOD)
GB/T 7701.1-2008 Granular activated carbon from coal - Granular activated carbon from coal for gas adsorption
GB/T 7702.1 Determination of moisture in granular activated carbon from coal
GB/T 7702.2 Standard test method for particle size distribution of granular activated carbon from coal
GB/T 7702.3 Test method for granular activated carbon from coal - Determination of hardness
GB/T 7702.4 Standard test method for packing density of granular activated carbon from coal
GB/T 7702.6 Test method for granular activated carbon from coal - Determination of methylene blue adsoption
GB/T 7702.7 Test method for granular activated carbon from coal - Determination of iodine number
3 Requirements
3.1 Appearance
It shall be the carbon material in dark black, and in granular.
3.2 Impurities
Activated carbon must not contain poisonous and harmful substances which can affect human health.
3.3 Technical indicators
The technical indicators of granular activated carbon from coal for water treatment shall comply with the requirements in Table 1.
4 Inspection rules
4.1 Inspection classification
Product inspection is divided into type testing and ex-factory inspection.
4.2 Type inspection
4.2.1 Inspection items
Inspection items are shown in Table 2.
4.2.3 Sampling
It shall accord with rules in 4.2.3 of GB/T 7701.1-2008.
4.2.4 Determined rule
It shall accord with rules in 4.2.4 of GB/T 7701.1-2008.
4.3 Ex-factory inspection
4.3.1 Quality assurance
The manufacturer shall guarantee that all products delivered shall meet the requirements of this standard. The products shall be inspected by Quality Inspection Department of the manufacturer. Each batch of products delivered shall be attached with quality certificate as stipulated.
4.3.5 Determined rule
It shall accord with rules in 4.2.5 of GB/T 7701.1-2008.
5 Inspection methods
5.1 Appearance inspection
It shall adopts visual method.
5.2 Measurement of pore volume
The measurement of pore volume shall accord with GB/T 7702.20.
5.8 Measurement of pH value
The measurement of pH value shall accord with GB/T 7702.16.
5.9 Measurement of iodine absorption
The measurement of iodine absorption shall accord with GB/T 7702.7.
5.10 Measurement of methylene blue absorption
The measurement of methylene blue absorption shall accord with GB/T 7702.6.
5.11 Measurement of phenol absorption
The measurement of phenol absorption shall accord with GB/T 7702.8.
5.12 Measurement of humic acid absorption
The measurement of humic acid absorption shall accord with Annex A.
6 Mark, package, transportation, storage
It shall accord with Chapter 6 of GB/T 7701.1-2008.
Annex A (Normative) Measurement of humic acid absorption
A.1 Scope
This Annex specifies the instruments needed to measure humic acid absorption, analysis procedures, calculation results, and other contents for granular activated carbon from coal for water treatment.
This Annex is applicable to measurement of humic acid absorption of granular activated carbon from coal for water treatment.
A.2 Principle
A certain volume of humic acid solution goes through activated carbon layer. Measure the variation in concentration of humic acid solution. And obtain the milligram number of specimen absorption humic acid in each gram of sample.
A.3 Specimen and material
A.3.1 Water. GB/T 6682, grade III
A.3.2 Sodium borate. Analytical pure.
A.3.3 Sodium borate buffer solution. pH=9.18.Weigh 3.80 g of sodium
borate(Na2B4O7·10H2O) to dissolve in water. Dilute to 1 L.
A.3.4 Humic acid. Biochemical reagent.
A.3.5 20 mg/L of humic acid solution Accurately weigh 20 mg (accurate to 0.1 mg) of humic acid. Dissolve in buffer solution.
Dilute to 1000 mL.
A.4 Instruments and equipment
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1914Chemical analytical filter paper
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 7701.1-2008Granular activated carbon from coal - Granular activated carbon from coal for gas adsorption
- GB/T 7702.1Standard test method for granular activated carbon from coal. Determination of moisture content
- GB/T 7702.2Standard test method for granular activated carbon from coal. Determination of particle size
- GB/T 7702.3Test method for granular activated carbon from coal -- Determination of hardness
GB/T 7701
Similar standards
Editions of GB/T 7701.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 7701.2-2008 | Granular activated carbon from coal - Granular activated carbon from coal for water treatment | current edition | Current |
| GB/T 7701.4-1997 | Granular activated carbon from coal - Granular activated carbon from coal for water treatment | previous edition | Superseded |
This page sells the current edition, GB/T 7701.2-2008. Earlier editions are listed for reference only.
How to Download GB/T 7701.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1914-2017 — Chemical analytical filter paper
GB/T 19141-2026 — Specification for domestic solar water heating systems
GB/T 19142-2016 — Packaging for export commodity—General rule
Secure payment via Stripe
Payments accepted
GB/T 7701.2-2008
$115.00