Valid

GB/T 7676.3-2017Direct acting indicating analogue electrical measuring instruments and their accessories—Part 3: Special requirements for wattmeters and varmeters (English PDF)

直接作用模拟指示电测量仪表及其附件 第3部分:功率表和无功功率表的特殊要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 7676.3-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

April 1, 2018

Scope

GB/T 7676.3-2017 is the English-translated version of 直接作用模拟指示电测量仪表及其附件 第3部分:功率表和无功功率表的特殊要求.

GB/T 7676.3-2017 is the Chinese standard "Direct acting indicating analogue electrical measuring instruments and their accessories—Part 3: Special requirements for wattmeters and varmeters".

Its scope clause reads: GB/T 7676 provisions of this part of the direct effect of analog instructions Power Meter and reactive power meter definition of terms, classification, points Level, general technical requirements, information, signs and symbols, packaging and storage and inspection rules.

This section applies to the direct effect of analog instructions power meter and reactive power meter. This section also applies to the combination of instruments and accessories when the accessory is used with the instrument and adjusted in combination.

This section also applies to the relationship between its indexing line and the input power is known, but not directly correspond to the direct action meter and reactive power meter power meter.

This section also applies to power meters and reactive power meters with electronics in their measurement and/or auxiliary circuits. This section does not apply to the corresponding special national standards for power meter and reactive power meter.

Its clauses include terms and definitions; classification, grading and compliance.

Found what you need?

Document preview — GB/T 7676.3-2017

National Standard of the People's Republic of China

ICS
17.220.20
Classification
N 21
Replacing
GB/T 7676.3-1998

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification, grading and compliance

1 Scope

GB/T 7676 provisions of this part of the direct effect of analog instructions Power Meter and reactive power meter definition of terms, classification, points

Level, general technical requirements, information, signs and symbols, packaging and storage and inspection rules.

This section applies to the direct effect of analog instructions power meter and reactive power meter.

This section also applies to the combination of instruments and accessories when the accessory is used with the instrument and adjusted in combination.

This section also applies to the relationship between its indexing line and the input power is known, but not directly correspond to the direct action meter and reactive power meter power meter.

This section also applies to power meters and reactive power meters with electronics in their measurement and/or auxiliary circuits.

This section does not apply to the corresponding special national standards for power meter and reactive power meter.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 7676.1-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 1. Definitions and general requirements

GB/T 7676.9-2017 Direct acting analogue indicating electrical measuring instruments and their accessories Part 9. Recommended test methods

3 Terms and definitions

Terms and definitions GB/T 7676.1-2017 define the terms and definitions apply to this document.

4 Classification, grading and compliance

4.1 Classification

According to GB/T 7676.1-2017 in the provisions of 4.1.

4.2 classification

Power meters and reactive power meters are graded according to the accuracy levels indicated by the following rating indices.

0.05, 0.1, 0.2, 0.3, 0.5, 1, 1.5, 2, 2.5, 3,

4.3 Compliance with the requirements of this section

According to GB/T 7676.1-2017 in the provisions of 4.3.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

Editions of GB/T 7676.3

EditionTitleRevisionStatus
GB/T 7676.3-2017Direct acting indicating analogue electrical measuring instruments and their accessories—Part 3: Special requirements for wattmeters and varmeterscurrent editionCurrent
GB/T 7676.3-1998Direct acting indicating analogue electrical measuring instruments and their accessories—Part 3: Special requirements for wattmeters and varmetersprevious editionSuperseded

This page sells the current edition, GB/T 7676.3-2017. Earlier editions are listed for reference only.

How to Download GB/T 7676.3-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 7676.3-2017

$225.00