GB/T 7607-2010Criteria for changing of diesel engine oil (English PDF)
柴油机油换油指标
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 7607-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
January 10, 2011
Implementation date
May 1, 2011
Scope
GB/T 7607-2010 is the English-translated version of 柴油机油换油指标.
GB/T 7607-2010 is the Chinese national standard covering criteria for changing of diesel engine oil. It was issued on 10 January 2011 and has been in force since 1 May 2011, replacing GB/T 7607-2002.
The document is under the responsibility of the Standardization Administration of China. This page is published from the official record of the 2010 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 7607-2010
National Standard of the People's Republic of China
- ICS
- 75.100
- Classification
- E 34
- Replacing
- GB/T 7607-2002
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Overview
- 2.2 Coring device
- 2.3 Conventional coring system
- 2.4 Special coring system
- 2.5 Cable coring
- 2.6 Directional Coring
- 2.7 Coring bit
- 2.8 Characteristics of the drill fluid pumping
- 2.9 Core claw
- 3 Terms and Definitions
- 3.1 Probe
- 3.2 Core Processing Method
- 3.3 Site sampling and analysis
- 4 Method Summary
- 4.1 Apparatus
- 4.2 Materials
- 4.3 Process Manual
- 4.4 Analysis Manual
- 5 Significance and Use
- 5.1 General Requirements
- 5.2 Project Outline
- 5.3 Process
- 5.4 Stationary Equipment
- 5.5 Rotary Equipment
- 5.6 Heater
- 5.7 Plot Plan and Transportation
- 5.8 Equipment Layout and Piping
- 5.9 Instrumentation
- 6 Preparation
- 6.9 Electric
- 7 Test Procedures
- 9 Report
1 Foreword
GB/T 7607-2010 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 10 January 2011 and has been in force since 1 May 2011.
It replaces the earlier edition GB/T 7607-2002, GB/T 7607-1995, GB/T 7607-1987.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 7607-2010 falls under ICS 75.100, in the field of petroleum and related technologies.
This catalogue holds 836 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 7607-2026 (later edition)
GB/T 7607-2002 (earlier edition)
GB/T 7607-1995 (earlier edition)
GB/T 7607-1987 (earlier edition)
Standards on related subjects:
GB 11122-2025 — Diesel engine oils
GB 11121-2025 — Gasoline engine oils
GB/T 6538-2022 — Determination of apparent viscosity of engine oils—Using the cold-cranking simulator
GB/T 7605-2024 — Determination of demulsibility for turbine oils in service
GB/T 7605-2008 — Determination of clemulsibility characteristics of turbine oils in service
5 Classification and status
International classification (ICS): 75.100
Chinese Standard Classification (CCS): E 34
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 7607
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 7607-2010 | Criteria for changing of diesel engine oil | current edition | Current |
| GB/T 7607-2002 | Criteria for changing of diesel engine oil | previous edition | Superseded |
This page sells the current edition, GB/T 7607-2010. Earlier editions are listed for reference only.
How to Download GB/T 7607-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 7607-2010
$90.00