GB/T 7249-2016Maximum lamp outlines for incandescent lamps (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 and GB/T 20000.2-2009 given rules.

This standard replaces GB/T 7249-2008 "Incandescent lamp maximum dimensions." this standard compared with GB/T 7249-2008, the main technical changes as follows.

--- Added "Note. The maximum size of the E27/27 cap also applies to E27/25." (See 1.1);

--- Light shape parameter table in the first column, "pear/A55-A60-PS60" to "pear/A50-A55-A60-PS60", the last Column adds the parameter column with the leaflet number "7249-GB/T -4090" (see 2.2);

--- Lamp Profile Data Sheet "7249-GB/T -1010-4" Updated to "7249-GB/T -1010-5", "7249-GB/T -1020-4" Updated for "7249-GB/T -1020-5", the "Bulb Type A55-A60-PS60" in the loose-leaf pages should be changed to "Bulb Type A50-A55-A60-PS60 ";

--- Added PAR111 lamp shape data sheet "7249-GB/T -4090-1".

This standard uses the translation method identical with IEC 60630:2009 "Maximum dimensions of incandescent lamps" (version 2.6).

The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.

GB/T 1406.1-2008 lamp head type and size - Part 1 screw head (IEC 60061-1:2005, MOD) GB/T 1406.2-2008 lamp type and size - Part 2. Pin-type lamp (IEC 60061-1:2005, MOD) Lamp cap types and dimensions - Part 3. Prefocus lampholders (IEC 60061-1:2005, MOD) GB/T 1406.3-2008 GB/T 1406.4-2008 Lamp cap types and sizes - Part 4. Miscellaneous lamp cap (IEC 60061-1:2005, MOD) GB/T 1406.5-2008 Lamp cap types and dimensions - Part 5. Bayonet lamp caps (IEC 60061-1:2005, MOD) Lamp caps and holders - Test gauges - Part 1. Gauges for screw - type base and socket (IEC 60061-3).

2004, MOD)

Lamp caps and holders - Test gauges - Part 2. Gauges for pin headers and holders (IEC 60061-3).

2004, MOD)

Lamp caps and holders - Inspection gauges - Part 3. Gauges for prefocusing lamp caps and holders (IEC 60061-3).

2004, MOD)

GB/T 1483.4-2009 Lamp cap, lamp holder inspection gauges Part 4 - Miscellaneous lamps, lamp holder gauges (IEC 60061-3:2004, MOD) Lamp caps and holders - Inspection gauges - Part 5. Gauges for bayonet type holders and holders (IEC 60061-3).

2004, MOD)

GB/T 10681-2009 Household and similar general lighting tungsten lamp performance requirements (IEC 60064.2005A4.2007, NEQ) GB/T 14094-201 × tungsten halogen lamps (non-motor vehicles) performance requirements (IEC 60357:2011, NEQ) GB 14196.1-2008 Incandescent lamps safety requirements - Part 1. Tungsten lamps for general lighting purposes in home and similar situations (IEC 60432-1:2005, IDT) GB 14196.2-2008 Incandescent lamp safety requirements - Part 2. Halogen lamps for general lighting purposes in home and similar situations (IEC 60432-2:2005, IDT) GB 14196.3-2008 Incandescent lamp safety requirements - Part 3. Halogen lamps (for non-motor vehicles) (IEC 60432-3:2005, IDT) GB/T 20143-2006 lamp maximum outline drawing of the development process (IEC 61126:1992, IDT) QB/T 1112-2013 Bulb type designation for lamp (IEC/T R60887.2010, IDT) for ease of use, this standard made the following editorial changes.

a) "This International Standard" be replaced by "this standard";

b) Use "," as the decimal point instead of ".";

c) The foreword to IEC 60630:2009 has been deleted.

This standard proposed by the China Light Industry Federation.

This standard by the National Lighting Standardization Technical Committee (SAC/TC224) centralized.

This standard was drafted. Hangzhou Han Light Co., Ltd., Beijing Institute of Light Sources.

1 General