GB/T 43723-2024Semi-integrated LED-lamps for general lighting services with supply voltages not exceeding 50Va.c.r.m.s.or 120V ripple free d.c.—Performance requirements (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by China Light Industry Federation.

This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224).

This document was drafted by: Guangdong Product Quality Supervision and Inspection Institute, Shenzhen Yufu Lighting Co., Ltd., Ningbo Yamao Optoelectronics Co., Ltd.

Co., Ltd., Zhejiang Shenghui Lighting Co., Ltd., and Beijing Electric Light Source Research Institute.

The main drafters of this document. Li Zili, Cao Xiaobing, Chen Hui, Duan Yanfang, and Lu Guangming.

The power supply voltage for general lighting is not greater than the AC effective value 50V or ripple-free DC 120V Semi-integrated LED lamp performance requirements

1 Scope

This document specifies the LED light source, control unit and lamp holder integrated into a single unit for general lighting in homes and similar occasions.

The classification and model naming, technical requirements, test methods and sample size for compliance testing of semi-integrated LED lamps (hereinafter referred to as "lamps") are as follows. This document applies to.

— Rated power 60W and below;

— The power supply voltage is not greater than AC effective value 50V or ripple-free DC 120V;

— The lamp holder complies with the requirements of 6.1 of GB/T 43626-2023;

— Directional semi-integrated LED lamp with appearance similar to the reflective halogen lamp MR11, MR16, AR111 series.

NOTE 1 The term “lamp” used in this document refers to “directional semi-integrated LED lamp”. Other types of lamps are under consideration.

Note 2.The power supply to the lamp is usually a converter/inverter designed for incandescent or halogen lamps, such as an inductive transformer, electronic transformer or LED-specific Used control device [see Figure 1b) in GB/T 43626-2023].

2 Normative references

GB/T 7249

GB/T 14094

GB/T 24826

GB/T 29295-2012

GB/T 43626-2023

3 Terms and definitions

The terms and definitions defined in GB/T 24826 and the following apply to this document.