GB/T 43626-2023LED lamps for general lighting services with supply voltages not exceeding 50 V a. c. r. m. s. or 120 V ripple free d. c. - Safety specifications (English PDF)

GB/T 43626-2023 is the English-translated version of 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范.

GB/T 43626-2023 — This document specifies LED lamps that integrate stable ignition components for general lighting in homes and similar situations: this document Specifies the safety and interchangeability requirements for lamps, as well as test methods and conditions for checking their eligibility: The scope of application is as follows: ---Rated power 60W and below; ---The rated voltage is not greater than the AC effective value 50V or ripple-free DC 120V; ---Lamp holder meets the requirements of Table 1: Note 1: Rated power 60W is under study: Thermal management may require lower power: This document applies to products connected to extra-low voltage (ELV) lighting fixtures: According to IEC 60364-7-715, only safety extra low voltage (SELV) sources are suitable in ELV lighting installations: If bare wires are used, it is best to the headlight voltage is AC 25V or DC 60V: The requirements of this document relate only to type testing: For all product inspection or batch inspection recommendations for lamps greater than AC 25V or DC 60V, please refer to GB/T 7000.1-2023 Table Q:1, Class III lamps column, 4 or column 5: Note 2: The term "lamp" is used in this document to represent semi-integrated LED lamps complying with the supply voltage specified in the above range, unless otherwise stated for other categories: type lamp: An overview of a system consisting of LED modules, lamps and control devices is given in IEC 62504: The power supply voltage is not limited to the grid voltage (for example such as 220V/50Hz): When the power supply voltage is AC or DC 12V, the semi-integrated LED light can also be started: Light control unit control sheet the element converts AC or DC 12V to a specific current and voltage to supply the LED in the lamp: Figure 1 shows a non-integrated LED lamp and a semi-Schematic diagram of two types of integrated LED lights: In the picture: (1) The converter is not dedicated to LED, but to incandescent lamp or tungsten halogen lamp design; Note: This type is not applicable to this document: (2) Non-integrated LED light sources, such as modules: it can have an LED Dedicated and non-replaceable lamp head according to IEC 60061-1: In the picture: (1) The converter is not dedicated to LED, but to incandescent lamp or tungsten halogen lamp design; (2)LED control unit; (3) Semi-integrated LED lamps defined in 3:1 of IEC 62504: a) Example of non-integrated LED lamp with power supply voltage not exceeding 50V b) The power supply voltage within the scope of this document does not exceed 50V Semi-integrated LED light example Figure 1 Types of LED lamps with power supply voltage not exceeding 50V

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.

1. 1

   Add to cart

   Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

2. 2

   Checkout

   Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

3. 3

   Instant delivery (0–9 sec)

   Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

4. 4

   Invoice included

   A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.