GB/T 5170.5-2016Inspection methods for environmental testing equipments for electric and electronic products—Part 5: Damp heat testing equipments (English PDF)
电工电子产品环境试验设备检验方法 第5部分：湿热试验设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5170.5-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 5170.5-2016 is the English-translated version of 电工电子产品环境试验设备检验方法 第5部分：湿热试验设备.
GB/T 5170.5-2016 is the Chinese standard "Inspection methods for environmental testing equipments for electric and electronic products—Part 5: Damp heat testing equipments".
Its scope clause reads: This part of GB/T 5170 specifies the inspection items, inspection equipment and requirements of the damp heat test equipment (hereinafter referred to as "equipment").
Test load, test conditions, test methods, test results, inspection cycle and so on. This part applies to the GB/T 2423.3, GB/T 2423.4, GB/T 2423.16, GB/T 2423.50 test equipment used in the inspection Test.
This part also applies to the testing of similar test equipment. Its clauses include normative reference documents; terms and definitions; test items; temperature uniformity.
Found what you need?
Document preview — GB/T 5170.5-2016
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- K 04
- Replacing
- GB/T 5170.5-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Test items
- 5 Inspection equipment and requirements
- 6 test load
- 7 test conditions
- 9 test results
- 10 inspection period
- Appendix A (informative) Method of measuring relative humidity by wet and dry bulb thermometer
1 Scope
This part of GB/T 5170 specifies the inspection items, inspection equipment and requirements of the damp heat test equipment (hereinafter referred to as "equipment").
Test load, test conditions, test methods, test results, inspection cycle and so on.
This part applies to the GB/T 2423.3, GB/T 2423.4, GB/T 2423.16, GB/T 2423.50 test equipment used in the inspection
Test. This part also applies to the testing of similar test equipment.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2423.3 Environmental testing for electric and electronic products - Part 2. Test methods - Test Cab. constant damp heat test
GB/T 2423.4 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db alternating hot and humid (12h 12h cycle)
GB/T 2423.16 Environmental testing for electric and electronic products - Part 2. Test methods - Test J and Guideline.
GB/T 2423.50 Environmental tests - Part 2. Test methods - Test Cy. Constant damp heat is mainly used for accelerated test of components
Electrical and electronic products - Environmental testing - Temperature/humidity chamber performance verification
GB/T 5170.1-2016 Environmental testing equipment for electric and electronic products - Test methods - Part 1. General
Industrial enterprises - Environmental noise emission standards
3 terms and definitions
GB/T 5170.1-2016 The terms and definitions defined apply to this document.
4 test items
The test items in this section are shown in Table 1.
Table 1 Test items
Serial number inspection items
1 temperature deviation
2 relative humidity deviation
3 temperature fluctuation
4 relative humidity fluctuation
5 temperature uniformity
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 5170.5
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5170.5-2016 | Inspection methods for environmental testing equipments for electric and electronic products—Part 5: Damp heat testing equipments | current edition | Current |
| GB/T 5170.5-2008 | Inspection methods for environmental testing equipments for electric and electronic products—Part 5: Damp heat testing equipments | previous edition | Superseded |
This page sells the current edition, GB/T 5170.5-2016. Earlier editions are listed for reference only.
How to Download GB/T 5170.5-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5170.1-2016 — Inspection methods for environmental testing equipments for electric and electronic products—Part 1: General
GB/T 5170.10-2017 — Inspection methods for environmental testing equipments—Part 10: Combined high and low temperature/low air pressure testing equipments
GB/T 5170.11-2017 — Inspection methods for environmental testing equipments—Part 11: Corrosive gas testing equipments
Secure payment via Stripe
Payments accepted
GB/T 5170.5-2016
$205.00