Valid

GB/T 5094.1-2018Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules (English PDF)

工业系统、装置与设备以及工业产品结构原则与参照代号第1部分：基本规则

Preview PDF

This is a limited preview

Buy now to download the full PDF (118 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5094.1-2018 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

July 13, 2018

Implementation date

February 1, 2019

Scope

GB/T 5094.1-2018 is the English-translated version of 工业系统、装置与设备以及工业产品结构原则与参照代号第1部分：基本规则.

GB/T 5094.1-2018 is the Chinese standard "Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules".

Its scope clause reads: This part of GB/T 5094 specifies the general principles of the system structure (including the system information structure). Based on these principles, rules and guidelines for the development of project (object) reference codes in any system are proposed.

The reference code is used to identify the project, so that the project information can be generated and retrieved, and the components corresponding to the project can be understood.

The reference code for the identification component is the key to finding project information in different kinds of files. The principles laid down in this section are general and apply to all technical fields (eg mechanical engineering, electrical engineering, construction engineering and logistics). engineering).

They can be used in systems based on different technologies or on several technologies. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 5094.1-2018

National Standard of the People's Republic of China

ICS: 01.080; 29.020
Classification: K 04
Replacing: GB/T 5094.1-2002

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 concept
5 Structural principle
6 Reference code composition
7 reference code set
8 location code
9 Reference code description
10 mark
Appendix A (informative) Development of the standard
Appendix B (informative) Project establishment and life cycle
Appendix C (informative) Operation of the project
Appendix D (informative) Understanding the reference code 47 from different aspects
Appendix E (Normative Appendix) Item 50 represented by several top nodes in one aspect
Appendix F (informative) A multi-structural example based on the same aspect
Appendix G (informative) Structure and reference code example
Appendix H (informative) Reference code example 57 in the system

1 Scope

This part of GB/T 5094 specifies the general principles of the system structure (including the system information structure).

Based on these principles, rules and guidelines for the development of project (object) reference codes in any system are proposed.

The reference code is used to identify the project, so that the project information can be generated and retrieved, and the components corresponding to the project can be understood.

The reference code for the identification component is the key to finding project information in different kinds of files.

The principles laid down in this section are general and apply to all technical fields (eg mechanical engineering, electrical engineering, construction engineering and logistics).

engineering). They can be used in systems based on different technologies or on several technologies.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

ISO /IEC 646 seven-digit coded character set for information technology information exchange (Informationtechnology-ISO 7-bitcoded

Charactersforinformationinterchange)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Project object

Object

Entities involved in research and development, manufacturing, use, and processing.

Note 1. An item may refer to a real or non-real “thing”, such as may exist or must exist.

Note 2. A project refers to a group of information related to it.

3.2 System

A set of projects that are considered to be a whole and separate from the environment in a given environment.

Note 1. A general definition of a system is to achieve a given goal, such as performing a clear function.

Note 2. The basis of the system can be natural or artificial material, or it can be a pattern or result of thinking (such as organizational form, mathematical method, programming language).

Note 3. The system is considered to be distinguished from the environment and other external systems by a fictitious surface.

Note 4. If the context is unclear, it is necessary to have a qualifier in the term “system”, such as control systems, colorimetric systems, unit systems, and transmission systems.

Note 5. When a system is part of another system, it can be considered an object in this section.

3.3 Aspect

Observe a specific perspective of an object.

GB/T 5169.16 | GB/T 5169.11 | GB/T 5169.10 | GB/T 2900.16 | GB/T 2900.106 | GB/T 5094.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 118 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 646 · ISO 7

Cited by

How to Download GB/T 5094.1-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.