GB/T 5089-2017General technical requirements for fan motors (English PDF)
电风扇用电动机通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5089-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 5089-2017 is the English-translated version of 电风扇用电动机通用技术条件.
GB/T 5089-2017 is the Chinese standard "General technical requirements for fan motors". Its scope clause reads: This standard specifies the electric fan motor (hereinafter referred to as the motor) model, the basic parameters and dimensions, technical requirements, test methods, seized The rules, packaging, transportation and storage requirements.
This standard applies to the fan capacitor operation of asynchronous motors, shaded pole asynchronous motors and permanent magnet brushless DC motor. Note. Fan motor (hereinafter referred to as the motor) refers to the fan connector above the head, except outside the connecting rod, cover shell, grille, blades (wings). Its clauses include models, the basic parameters and dimensions.
Found what you need?
Document preview — GB/T 5089-2017
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Classification
- K 26
- Replacing
- GB/T 5089-2008
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 models, the basic parameters and size
- 4 technical requirements
- 5 test methods
- 6 Inspection rules
- 7 packaging, transportation and storage
1 Scope
This standard specifies the electric fan motor (hereinafter referred to as the motor) model, the basic parameters and dimensions, technical requirements, test methods, seized
The rules, packaging, transportation and storage requirements.
This standard applies to the fan capacitor operation of asynchronous motors, shaded pole asynchronous motors and permanent magnet brushless DC motor.
Note. Fan motor (hereinafter referred to as the motor) refers to the fan connector above the head, except outside the connecting rod, cover shell, grille, blades (wings).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1993 rotary motor cooling method
GB/T 4798.1 electrical and electronic product environmental conditions - Part 1. Storage
GB/T 4798.2 electrical and electronic product application environmental conditions Part 2. Transport
GB/T 4831 rotary motor product code preparation
GB/T 4942.1 rotary motor overall structure of the protection level (IP code) classification
GB/T 5171.1-2014 small power motors Part 1. General specification
GB/T 5171.21 small power motors - Part 21. General test methods
GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method
GB/T 12350 low-power motor safety requirements
GB/T 13126 mechanical and electrical products wet and dry protective packaging general technical conditions
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 19142 General rules for the packaging of exports
3 models, the basic parameters and dimensions
3.1
The preparation of the motor model can be GB/T 4831 requirements.
3.2
Enclosure rating motor should be specified in the corresponding product standards, and shall comply with the requirements of GB/T 4942.1.
3.3
motor cooling method should be specified in the appropriate product standards, and should comply with GB/T 1993 requirements.
3.4
motor installation dimensions and dimensions should be consistent with the requirements of product drawings.
3.5
motor rated parameters.
--- AC motor rated voltage of 220V, rated frequency of 50Hz. Unless otherwise agreed
--- Brushless DC motor by the power supply is divided into AC and DC. DC brushless DC motor rated voltage of 12V,
24V, 36V, 48V, 60V, 72V, 96V, 110V, 220V, 310V, 440V;
--- Preferred rated input power (W) .30,35,40,50,60,70,90;
--- The preferred rated output power shall comply with the provisions of GB/T 5171.1-2014;
--- Preferred motor supporting blade (wing) diameter (mm) .200,230,250,300,350,400,450,500,600;
--- Motor in the distribution of fan (wing) cooling conditions for continuous work system (S1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 5089
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5089-2017 | General technical requirements for fan motors | current edition | Current |
| GB/T 5089-2008 | General technical requirements for fan motors | previous edition | Superseded |
This page sells the current edition, GB/T 5089-2017. Earlier editions are listed for reference only.
How to Download GB/T 5089-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 5089-2017
$145.00