GB/T 46877-2025Carbon dioxide capture - General requirements for post-combustion CO2 capture systems (English PDF)
二氧化碳捕集 燃烧后二氧化碳捕集系统通用要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 46877-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2025
Implementation date
July 1, 2026
Scope
GB/T 46877-2025 is the English-translated version of 二氧化碳捕集 燃烧后二氧化碳捕集系统通用要求.
GB/T 46877-2025 is the Chinese standard "Carbon dioxide capture - General requirements for post-combustion CO2 capture systems". Its scope clause reads: This document specifies the classification, composition, and technology of post-combustion carbon dioxide (CO2) capture systems (hereinafter referred to as "carbon capture systems").
Require. This document applies to the design and construction of post-combustion CO2 capture systems (excluding experimental setups). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 46877-2025
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 29
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This document specifies the classification, composition, and technology of post-combustion carbon dioxide (CO2) capture systems (hereinafter referred to as "carbon capture systems").
Require.
This document applies to the design and construction of post-combustion CO2 capture systems (excluding experimental setups).
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 150 Pressure Vessels (All Parts)
GB/T 151 Heat Exchangers
GB 8978 Integrated Wastewater Discharge Standard
GB/T 12337 Steel Spherical Storage Tanks
GB 14554 Odor Pollutant Emission Standard
GB 18599 Standard for Pollution Control of General Industrial Solid Waste Storage and Disposal Sites
GB/T 20322 Reciprocating compressors for the petroleum and natural gas industry
GB/T 35528 Safety Guidelines for Cryogenic Liquefied Gases
GB/T 45121 Technical Specification for Energy Consumption Measurement of Flue Gas Carbon Dioxide Capture System in Thermal Power Plants
GB 50058 Design Code for Electrical Installations in Explosive Atmospheres
GB/T 50087 Design Code for Noise Control in Industrial Enterprises
GB 50217 Standard for Design of Cables for Power Engineering
GB 50264 Code for Design of Thermal Insulation Engineering for Industrial Equipment and Piping
GB/T 50493 Design Standard for Detection and Alarm Systems of Combustible and Toxic Gases in the Petrochemical Industry
GB/T 51316 Standard for Engineering Design of Flue Gas Carbon Dioxide Capture and Purification
JB/T 6430 Generally used oil-injected screw air compressors
JB/T 6443 Centrifugal compressors for petroleum, chemical and gas industries
NB/T 47003.1 Atmospheric Pressure Vessels - Part 1.Welded Steel Atmospheric Pressure Vessels
NB/T 47041 Tower Containers
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Post-combustion CO2 capture
The process of capturing CO2 from the flue gas produced during fuel combustion.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 151Heat exchangers
- GB 8978Integrated wastewater discharge standard
- GB/T 12337Steel spherical tanks
- GB 14554Emission standards for odor pollutants
- GB 18599Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
- GB/T 20322Petroleum and natural gas industries - Reciprocating compressors
GB/T 150 · GB/T 50493
How to Download GB/T 46877-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14554-1993 — Emission standards for odor pollutants
GB 18599-2020 — Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
GB 50058-2014 — Code for design of electrical installations in explosive atmospheres
Secure payment via Stripe
Payments accepted
GB/T 46877-2025
$150.00