GB/T 46006-2025Specification of desert inventory (English PDF)
沙漠、沙地、戈壁编目规范
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 46006-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 1, 2025
Implementation date
November 1, 2025
Scope
GB/T 46006-2025 is the English-translated version of 沙漠、沙地、戈壁编目规范.
GB/T 46006-2025 is the Chinese national specification for drawing up an inventory of deserts, sandy lands and Gobi, and it applies to any such area of one square kilometre or more.
It fixes the cataloguing parameters, the name and the code of each area, and describes how the attribute information is collected, classified, analysed and catalogued.
Official names are preferred, taken from maps or published literature, while the code is built from the administrative region code, the eco-geographical division code, the sequence code of the division and a number, following Appendix A for the zoning system and Appendix B for the coding rules.
The attributes recorded are geographical location, altitude, area, geology, landform, hydrology, soil, climate and biology, each with its own form in the appendices. It was issued on 1 August 2025 and has applied since 1 November 2025.
Found what you need?
Document preview — GB/T 46006-2025
National Standard of the People's Republic of China
- ICS
- 65.020
- Classification
- B 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Cataloging parameter requirements
- 4.1 Names of Deserts, Sandy Lands, and Gobi Deserts
- 4.2 Desert, Sandy Land, and Gobi Coding
- 5 Desert, Sandy Land, Gobi Attribute Information
- 5.1 Geographical Locations of Deserts, Sandy Land, and Gobi Deserts
- 5.2 Altitude of Deserts, Sandy Lands, and Gobi Deserts
- 5.3 Desert, sandy land, and Gobi area
- 5.4 Geological Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- 5.5 Landform Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- 5.6 Hydrological Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- 5.7 Characteristics of Desert, Sandy Land, and Gobi Soils
- 5.8 Climate Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- 5.9 Biological Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- 6 Cataloging attribute information processing requirements
- 6.1 Data Sources, Collection, and Editing
- 6.2 Data Information Classification
- 6.3 Data Information Analysis and Processing
- 6.4 Data Information Cataloging
- 7 Cataloging results
- Appendix A (Normative) Ecological and Geographical Zoning System of Deserts, Sandy Lands, and Gobi Deserts in China
- Appendix B (Normative) Coding Rules for Deserts, Sandy Lands, and Gobi Deserts in China
- Appendix C (Informative) Format of Basic Information Table for Desert, Sandy Land, and Gobi Catalog
- Appendix D (Informative) Format of Geological Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- Appendix E (Informative) Format of information table on desert, sandy land and Gobi landform characteristics
- Appendix F (Informative) Format of Hydrological Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- Appendix G (Informative) Table format of soil characteristics of deserts, sandy lands, and Gobi
- Appendix H (Informative) Format of Information Table on Climate Characteristics of Deserts, Sandy Lands, and Gobi Deserts
- Appendix I (Informative) Format of Desert, Sandy Land, and Gobi Biological Characteristics Information Table
- Appendix J (Informative) Summary table format of desert, sandy land and Gobi inventory results
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.
1 Scope
This document specifies the requirements for cataloging the names, codes, and attribute information of deserts, sandy lands, and Gobi, and describes the collection and methods of collection, classification, analysis, cataloguing, etc.
This document is applicable to the cataloging of deserts, sandy lands and Gobi with an area of 1 square kilometer or more.
2 Normative references
This document has no normative references.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Desert inventory
According to certain standards and rules, the attribute information of deserts, sandy lands and Gobi is analyzed, selected, described and recorded as entries.
Then organize the items into a directory or purpose process in a certain order.
4 Cataloging parameter requirements
4.1 Names of Desert, Sandy Land, and Gobi
The names of deserts, sandy lands and Gobi are essential components of the catalog. When cataloguing, the official names of deserts, sandy lands and Gobi should be used.
If the desert, sandy land or Gobi to be investigated and catalogued does not have an official name, an informal name should be determined to determine the desert, sandy land or Gobi.
When naming Gobi, avoid duplication of names of deserts, sandy lands and Gobi that have been surveyed and catalogued.
The names of deserts, sandy lands, and Gobi can be obtained through the following three methods.
-- The names of deserts, sandy lands, and Gobi deserts marked on relevant maps can be used as a reference for cataloguing;
-- The names of deserts, sandy lands, and Gobi Deserts given in published literature may be used for cataloguing references;
--For deserts, sandy lands, and Gobi deserts whose names cannot be verified, they can be named according to relevant regulations and principles.
Verification method. Verify the names of deserts, sandy lands and Gobi by consulting relevant maps, published literature or according to relevant regulations and principles.
The origin of the name should be clearly stated, and the commonly used official name should be used. If an informal name is used, the basis for the name should be clearly stated and there should be no duplication.
4.2 Desert, Sandy Land, and Gobi Coding
The codes for deserts, sandy lands and Gobi should be convenient for computer storage, data statistics, and retrieval and use of cataloging results.
The desert, sandy land, or Gobi desert is composed of four parts. the administrative region code, the eco-geographical division code, the sequence code of the division, and the number.
The eco-geographical division system of deserts, sandy lands and Gobi should comply with the provisions of Appendix A. The coding rules of deserts, sandy lands and Gobi in China should comply with the provisions of Appendix B.
Verification method. Verify whether the desert, sandy land, and Gobi codes comply with the coding rules specified in Appendix B. Check whether the codes are generated by desert, sandy land, and Gobi.
The code consists of four parts. the administrative area code of the Gobi Desert, the eco-geographical division code, the sequence code of the division, and the number. Accuracy, ensuring the uniqueness and standardization of the coding.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 46006-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 46006-2025
$360.00