Valid

GB/T 4324.3-2012Methods for chemical analysis of tungsten - Part 3: Determination of tin content - Hydrogenate atomic absorption spectrometry (English PDF)

钨化学分析方法 第3部分:锡量的测定 氢化物原子吸收光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 4324.3-2012 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2012

Implementation date

October 1, 2013

Scope

GB/T 4324.3-2012 is the English-translated version of 钨化学分析方法 第3部分:锡量的测定 氢化物原子吸收光谱法.

GB/T 4324.3-2012 is the Chinese standard "Methods for chemical analysis of tungsten - Part 3: Determination of tin content - Hydrogenate atomic absorption spectrometry".

Its scope clause reads: GB/T 4324 provisions of this part of the tungsten powder, tungsten trioxide, tungsten, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate Determination of tin content.

This Part applies to tungsten powder, tungsten measure, tungsten trioxide, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate in tin content set.

Determination range of 0.00005% to 0.020%. Its clauses include method summary; reagents; instrument.

Found what you need?

Document preview — GB/T 4324.3-2012

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 63
Replacing
GB/T 4324.3-1984

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Method summary
  • 3 Reagents
  • 4 Instrument

1 Scope

GB/T 4324 provisions of this part of the tungsten powder, tungsten trioxide, tungsten, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate

Determination of tin content.

This Part applies to tungsten powder, tungsten measure, tungsten trioxide, tungsten blue, purple tungsten, tungsten carbide, tungsten acid, ammonium metatungstate, ammonium paratungstate in tin content set. Determination range of 0.00005% to 0.020%.

2 Method summary

Tungsten powder, tungsten, tungsten blue, fine particles of tungsten carbide, tungsten trioxide, tungstic acid, ammonium paratungstate, metatungstate hydrogen peroxide and sodium hydroxide stars

Solutions, purple tungsten, tungsten carbide coarse particles into tungsten trioxide after burning hydrogen peroxide and sodium hydroxide decomposition. Tartaric acid to adjust acidity and complex tungsten,

Phosphate solubilization by flow injection - hydride generator and atomic absorption spectrometry combined with determination of tin content.

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity.

3.1

Hydrogen peroxide (rho1.10g/mL).

3.2

hydrochloric acid (rho1.19g/mL), pure class distinctions.

3.3

Sodium hydroxide solution (100g/L).

3.4

tartaric acid solution (150g/L).

3.5

hydrochloric acid (19), pure class distinctions.

3.6

phosphate (11).

3.7 solution of potassium borohydride (10g/L)

Weigh 2g 0.6g potassium borohydride and sodium hydroxide dissolved in 200mL of water. The time is now equipped with.

3.8 tungsten matrix

sample should be of a similar nature, the tin content of not more than 0.00001%.

3.9 Storage tin standard solution

Weigh 0.1000g pure tin (99.95% before using scrape the surface oxide layer), placed 1000mL capacity

Flask, 200mL of hydrochloric acid (3.2), on a boiling water bath for complete dissolution and then cooled, diluted with water to the mark. This solution containing 1mL

0.1mg tin.

3.10

tin standard solution A. Pipette 20.00mL tin standard solution (3.9) in 200mL volumetric flask, dilute to the mark with hydrochloric acid (3.5),

Shake well. 1mL containing 10µg solution tin.

3.11 tin standard solution B

Pipette 20.00mL tin standard solution (3.10) in 200mL flask, diluted with hydrochloric acid (3.5) to the mark

Degree, shake. This solution 1mL containing 1µg tin.

3.12 phenolphthalein solution (10g/L)

Weigh 1g phenolphthalein dissolved in 100mL absolute ethanol.

3.13

HCl carrier (199).

4 Instrument

4.1

Atomic absorption spectrometer, with a tin hollow cathode lamp, analyze wavelength 224.6nm.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 4324.3

EditionTitleRevisionStatus
GB/T 4324.3-2012Methods for chemical analysis of tungsten - Part 3: Determination of tin content - Hydrogenate atomic absorption spectrometrycurrent editionCurrent
GB/T 4324.3-1984Methods for chemical analysis of tungsten - Part 3: Determination of tin content - Hydrogenate atomic absorption spectrometryprevious editionSuperseded

This page sells the current edition, GB/T 4324.3-2012. Earlier editions are listed for reference only.

How to Download GB/T 4324.3-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 4324.3-2012

$145.00