GB/T 43063-2023Integrated circuit—Test method for CMOS image sensors (English PDF)
集成电路 CMOS图像传感器测试方法
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43063-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2023
Implementation date
January 1, 2024
Scope
GB/T 43063-2023 is the English-translated version of 集成电路 CMOS图像传感器测试方法.
This document describes the parameters of linear array, area array and time delay integration CMOS image sensors with a linear photoelectric response, together with the methods for testing them. The document applies to the parameter testing of those devices.
Found what you need?
Document preview — GB/T 43063-2023
National Standard of the People's Republic of China
- ICS
- 31.200
- Classification
- L 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative reference documents
- 3 Terms and Definitions
- 4 Test parameter names and symbols
- 5 General requirements
- 5.1 Test environment
- 5.2 Test system
- 5.3 Condition
- 5.4 Electrostatic protection requirements
- 6 Test method
- 6.1 Conversion gain K
- 6.2 Dark signal SD
- 6.3 Dark signal non-uniformity (fixed pattern noise) FPN
- 6.4 Read noise Nm
- 6.5 Response nonlinearity Llin
- 6.6 Full well charge number NS
- 6.7 Dynamic range DR
- 6.8 Signal-to-noise ratio S/N
- 6.9 Photoresponse non-uniformity PRNU
- 6.10 Sensitivity R
- 6.11 Defective pixel
- 6.12 Charge retention NRE
- 6.13 Resistance to dispersion
- 6.14 Quantum efficiency eta
- 6.15 Spectral responsivity Rlambda
- 6.16 Peak response wavelength lambdaP
- 6.17 Spectral response range
- 6.18 Modulation transfer function (Nyquist frequency) MTFN
- 6.19 Dynamic Modulation Transfer Function (Nyquist Frequency) MTFNs
- 6.20 Angle response curve
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document describes linear array, area array and time delay integration (TDI) CMOS image sensors with linear photoelectric response characteristics (hereinafter Referred to as device) parameters and their test methods.
This document is suitable for parameter testing of linear array, area array and TDI devices with linear photoelectric response characteristics.
2 Normative reference documents
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Darkfield
The test environment without light in which the device is located.
3.2 Bright field light field
The lighting test environment in which the device is located.
3.3 Effective pixel
In the imaging pixel array, there are no pixels covered by opaque materials and participating in the final imaging display.
3.4 Mean image
Under the condition that the input uniform irradiance, integration time, and device parameters are all fixed, calculate the F frame image output by the device in units of pixels.
Mean value, and finally the image composed of the mean value of all valid pixel F-frame images.
3.5 Darksignalcorrectiondarksignalcorrection
Under the same integration time and device parameters, the average image obtained by the device in the bright field is different from the average image obtained in the dark field. operate.
4 Test parameter names and symbols
The test parameter names and symbols are shown in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
Similar standards
How to Download GB/T 43063-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 43063-2023
$500.00