GB/T 42859-2023Execution requirement of three-oriented analysis for aerospace product quality problems (English PDF)
航天产品质量问题三个面向分析方法实施要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42859-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 6, 2023
Implementation date
December 1, 2023
Scope
GB/T 42859-2023 is the English-translated version of 航天产品质量问题三个面向分析方法实施要求.
This document specifies the general requirements, the procedure and the content of the three-oriented analysis carried out on quality problems in aerospace products.
The document applies to the units responsible for developing aerospace products when they analyse and correct a quality problem from the standpoint of the product, the process and the organisation; products in other fields may follow it accordingly.
Found what you need?
Document preview — GB/T 42859-2023
National Standard of the People's Republic of China
- ICS
- 03.120.10
- Classification
- V 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- PrefaceI
- 1 Scope
- 2 Normative reference documents
- 3 Terms and Definitions
- 4 General requirements
- 4.1 General
- 4.2 Analysis object
- 4.3 Responsibilities
- 4.4 Management requirements
- 5 Three analysis-oriented procedures for aerospace product quality issues
- 5.1 General Procedure
- 5.2 Analysis start
- 5.3 Analysis Implementation
- 5.4 Review and Control
- 5.5 Closed loop of measures
- 6 Focus on three analytical methods for aerospace product quality issues
- 6.1 Contents for product analysis
- 6.2 Contents for process analysis
- 6.3 Contents for organizational analysis
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document stipulates the general requirements, procedures and analysis content for the implementation of three analytical methods for aerospace product quality issues.
This document is suitable for units responsible for the development of aerospace products to analyze and improve quality issues from the perspectives of products, processes, organizations, etc. Work, products in other fields will be implemented accordingly.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB/T 19000 Quality Management System Fundamentals and Terminology
GB/T 29076 Implementation requirements for zeroing out quality issues in aerospace products
3 Terms and definitions
The terms and definitions defined in GB/T 19000, GB/T 29076 and the following apply to this document.
3.1 Three-oriented analysis
For quality problems that occur in aerospace products at all levels, analyze the deep-seated causes of the problems from the three dimensions of product, process and organization, and find out Identify the hidden dangers and weak links behind the problem, and propose and implement improvement measures.
Note: Quality problems include failures, defects, non-conformities and other unexpected situations.
3.2 Products-oriented analysis
In view of the technical reasons involved in quality problems, other products of the same kind, with the same principle design and the same process design of the organization Conduct horizontal analysis, draw inferences from one instance and implement improvements to achieve horizontal technical and quality requirements for similar products and related products within the organization. towards a consistent approach.
3.3 Process-oriented analysis
Analyze the technology, management and other related processes involved in quality issues, find possible hidden dangers and weak links in the process and implement them Improvement to achieve continuous improvement and optimization of processes.
3.4 Organization-oriented analysis
For quality issues, analyze organizational management problems from aspects such as personnel capabilities and awareness, implementation of responsibilities, technical conditions, resource guarantee and continuous improvement.
Methods to identify hidden dangers and weak links and implement improvements to continuously improve the organization's quality assurance capabilities.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 42859-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19000-2016 — Quality management systems -- Fundamentals and vocabulary
GB/T 29076-2021 — Execution requirements of quality problem closed loop for aerospace product
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 42859-2023
$150.00