Valid

GB/T 42848-2023Semiconductor intergrated circuits—Test method of direct digital frequency synthesizer (English PDF)

半导体集成电路 直接数字频率合成器测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42848-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 6, 2023

Implementation date

December 1, 2023

Scope

GB/T 42848-2023 is the English-translated version of 半导体集成电路 直接数字频率合成器测试方法.

This document specifies a general method for testing the electrical characteristics of direct digital frequency synthesizers made as semiconductor integrated circuits.

The document applies to the testing of single-channel and multi-channel direct digital frequency synthesizer circuits.

Found what you need?

Document preview — GB/T 42848-2023

National Standard of the People's Republic of China

ICS
31.200
Classification
L 56

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative reference documents
  • 3 Terms and Definitions
  • 4 General Provisions
  • 4.1 Test environment
  • 4.2 Test Notes
  • 4.3 Related documents
  • 5 static parameters
  • 5.1 Logic input high level voltage VIH
  • 5.2 Logic input low level voltage VIL
  • 5.3 Logic output high-level voltage VOH
  • 5.4 Logic output low level voltage VOL
  • 5.5 Logic input high level current IIH
  • 5.6 Logic input low level current IIL
  • 5.7 Gain error EG
  • 5.8 Integral nonlinearity INL
  • 5.9 Differential nonlinearity DNL
  • 5.10 Full scale output current IFS
  • 5.11 Output offset current IOO
  • 5.12 Voltage adaptation range VDAC
  • 5.13 Clock input bias voltage Vb
  • 6 Dynamic Parameter Test
  • 6.1 Setup time tSU
  • 6.2 Holding time tH
  • 6.3 Output capacitor CO
  • 6.4 Clock input frequency fREFCLK
  • 6.5 Clock input amplitude VREFCLK
  • 6.6 Output wideband spurious-free dynamic range SFDRW
  • 6.7 Output narrowband spurious-free dynamic range SFDRN
  • 6.8 Channel isolation ISO CH
  • 6.9 Output amplitude matching error between channels deltaACH
  • 6.10 Phase difference between channels deltaPCH
  • 6.11 Phase noise
  • 6.12 Noise power spectral density
  • 6.13 Power consumption PW
  • 6.14 Supply current ICC

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies a general test method for the electrical characteristics of direct digital frequency synthesizers (hereinafter referred to as "devices") in semiconductor integrated circuits.

This document is applicable to the testing of single-channel and multi-channel direct digital frequency synthesizer circuits.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 17574-1998 Semiconductor devices integrated circuits Part 2: Digital integrated circuits

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Full-scale output current

Configure the output current when the analog output terminal is full scale output.

3.2 Gain error

For voltage or current output type devices, the device converts the deviation between the actual output range of the voltage or current and the ideal output range.

3.3 DeltaACH

Under the same input amplitude configuration of each output channel of a multi-channel device, the absolute value of the maximum deviation between output amplitudes is the same as the smallest absolute value of each channel. The percentage of the output amplitude value.

3.4 Output offset current

Configure the output current when the analog output terminal is zero output.

3.5 Output capacitance

The capacitance value at the output of the device under specified conditions.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 42848-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42848-2023

$455.00