Valid

GB/T 42630-2023Methods for chemical phase analysis of copper nickel sulfide ores—Determination of nickel and cobalt contents in six mineral phases (English PDF)

铜镍硫化物矿石化学物相分析方法 6 种矿物相中镍和钴含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42630-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 23, 2023

Implementation date

December 1, 2023

Scope

GB/T 42630-2023 is the English-translated version of 铜镍硫化物矿石化学物相分析方法 6 种矿物相中镍和钴含量的测定.

This document describes the chemical phase analysis of copper-nickel sulfide ores for nickel and cobalt by physical and chemical selective separation followed by inductively coupled plasma optical emission spectrometry (ICP-OES) or atomic absorption spectrometry.

The document applies to the determination of the nickel and cobalt contents of six mineral phases: the magnetic sulfide phase, the magnetic non-sulfide phase, the sulfate phase, the non-magnetic sulfide phase, the oxidized phase together with the soluble gangue phase, and the refractory gangue phase.

The detection limits and measuring ranges of the method are given in its Table 1 and Table 2.

Found what you need?

Document preview — GB/T 42630-2023

National Standard of the People's Republic of China

ICS
07.060
Classification
D 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Principle
  • 5 Reagent or material
  • 6 Instruments and Equipment
  • 7 sample
  • 8 Test Step
  • 9 Experimental data processing
  • 10 Precision
  • 11 Quality Assurance and Control
  • Appendix A (Informative) Instrument Reference Working Conditions and Description of Interference
  • Appendix B (informative) Statistical data obtained from interlaboratory test results
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

Introduction

The total resources identified in my country's copper-nickel sulfide-type deposits account for 86% of the country's total nickel ore resources, and the reserves account for 99% of the country's total reserves. my country is rich in cobalt ore resources, but it mainly occurs in other ores in the form of associated elements, most of which are associated with copper-nickel sulfide ores.

75% of the total comes from nickel mines of copper-nickel sulfide type deposits. In order to better evaluate and develop and utilize nickel and cobalt ore resources, it is necessary to identify nickel (cobalt)

The occurrence state of nickel and cobalt in the ore, and the establishment of a chemical phase analysis method suitable for the main nickel (cobalt) ore types in my country.

The chemical phase of nickel ore is usually divided into four phases. sulfate phase, sulfide phase, oxide phase and silicate phase; the chemical phase of cobalt ore is usually divided into There are three phases. sulfide phase, oxide phase and refractory gangue phase. This document is included in "Rock and Mineral Analysis" (Fourth Edition)) Volume III 43.7 Nickel Ore On the basis of phase analysis and 44.6 cobalt ore phase analysis, the selective separation conditions of each mineral phase were optimized; for cobalt and nickel They have similar geochemical and physicochemical properties, similar mineral assemblages and dissolution characteristics, and co-associated characteristics, and established a systematic and complete system for the first time.

A chemical phase analysis method system for the simultaneous analysis and determination of nickel and cobalt in copper-nickel sulfide ores; for the physical chemistry of copper-nickel sulfide ores For the first time, the magnetic mineral phase in copper-nickel sulfide ore was used as a chemical phase, and the magnetic phase was further divided into magnetic sulfide phase, magnetic The non-sulfide phase improves the application purpose and use value of the chemical phase analysis results; the application of modern analysis and testing technology to copper nickel sulfide For the chemical phase analysis of ores, a method based on inductively coupled plasma emission spectrometry was established, supplemented by atomic absorption spectrometry for the determination of nickel.

The chemical phase analysis and detection system of cobalt and cobalt can improve the accuracy and work efficiency of chemical phase analysis results. This document was created for Nickel (Cobalt) Provide technical support for ore exploration, development and utilization.

The issuer of this document draws attention to the fact that when declaring compliance with this document, it may involve the relevant magnetic Selective separation of nickel and cobalt in the magnetic sulfide phase, magnetic non-sulfide phase, non-magnetic sulfide phase, oxide phase and soluble gangue phase and refractory gangue phase use of related patents.

The issuing authority of this document has no position regarding the veracity, validity and scope of this patent.

The patent holder has committed to the issuing authority of this document that he is willing to cooperate with any applicant on reasonable and non-discriminatory terms and conditions Next, negotiate the licensing of patents. The patent holder's statement is on file with the issuing authority of this document.

Please note that in addition to the above patents, some content of this document may still involve patents. The issuer of this document is not responsible for identifying patents Responsibility.

Chemical Phase Analysis Method of Copper Nickel Sulfide Ore Determination of Nickel and Cobalt Contents in Six Mineral Phases Caution --- Personnel using this document should have practical experience in formal laboratory work. This document does not address all possible security issues question. It is the user's responsibility to take appropriate safety and health measures and ensure compliance with the conditions stipulated in the relevant national laws and regulations.

1 Scope

This document describes the physical and chemical selective separation - inductively coupled plasma optical emission spectrometry (ICP-OES) or atomic absorption spectrometry The magnetic sulfide phase, magnetic non-sulfide phase, sulfate phase, nonmagnetic sulfide phase, oxidized phase and Chemical phase analysis method for nickel and cobalt content in soluble gangue phase and refractory gangue phase.

This document is applicable to magnetic sulfide phase, magnetic non-sulfide phase, sulfate phase, non-magnetic Determination of nickel and cobalt content in 6 mineral phases including sulfide phase, oxide phase, soluble gangue phase and refractory gangue phase.

The detection limit and measurement range of the analytical method are shown in Table 1 and Table 2.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Similar standards

How to Download GB/T 42630-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42630-2023

$330.00