GB/T 42330-2023Classification code of ocean sample management (English PDF)
大洋样品管理分类代码
This is a limited preview
Buy now to download the full PDF (50 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42330-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 17, 2023
Implementation date
October 1, 2023
Scope
GB/T 42330-2023 is the English-translated version of 大洋样品管理分类代码.
GB/T 42330-2023 sets the classification codes used to manage ocean samples.
It gives the coding method - code composition, overall code structure, the characters used and the sequential coding rules - and then the code structure and code tables for storage information, status type, sample classification, sampling task, sampling method, sampling position, station number, repeat station identifier, the serial number of samples from one station, core recovery number, split number, sectional cutting length and sequence, and the number of samples taken.
Clause 3 defines ocean sample, status type, split state, sample category and sample type. Clause 1 states that it applies to classification and code compilation in ocean sample management and service, and that the management of other samples may refer to it. Issued on 17 March 2023, it has applied since 1 October 2023.
Found what you need?
Document preview — GB/T 42330-2023
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Encoding method
- 4.1 Code Composition
- 4.2 Overall code structure
- 4.3 Encoded characters
- 4.4 Sequential coding rules
- 5 Code structure and code table
- 5.1 Store information
- 5.2 Status Type
- 5.3 Sample classification
- 5.4 Sampling task
- 5.5 Sampling method
- 5.6 Sampling location
- 5.7 Station number
- 5.8 Repeat station identification code
- 5.9 The serial number of the same sample at the station is
- 5.10 Core return number
- 5.11 Division number
- 5.12 Sectional cutting length
- 5.13 Segment cutting sequence number
- 5.14 Number of samples to be taken
- References
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
1 Scope
This document specifies the coding method, code structure and code table of the classification codes for oceanic sample management.
This document is applicable to the classification and code compilation in the process of ocean sample management and service, as well as the management classification and code compilation of other samples. Can refer to use.
2 Normative references
This document has no normative references.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Ocean sample
All kinds of ores and rocks obtained from resource exploration, development and related environmental protection, scientific and technological research, and resource survey activities in the deep seabed area Physical data such as rocks, sediments, sea water, and organisms.
3.2 Status type
The degree of integrity of sample segmentation, shape after cutting, and sample processing and processing of samples prepared for analysis and testing or observation and research type.
3.3 Split state
Columnar sediment core (3.7), multi-tubular sediment core (3.8), cannulated sediment core (3.9), single-time secondary core (3.10), multiple-time secondary rock Heart (3.11) and chimney body, the state of derived samples obtained through segmental cutting, longitudinal dissection, layered separation and other operations.
3.4
The sample is prepared by processing such as dividing, cutting, grinding, polishing, separating, and sorting, and it is used for analysis, testing, observation and identification of samples type.
3.5 Sample category
The character and shape of the sample.
Note: Different types of samples are applicable to different coding methods of derivative codes.
3.6 Sample type
Natural classification of samples.
Note: For the convenience of operation, the types of samples in this document are subject to identification by naked eyes and conventional means such as magnifying glass, excluding rock ore identification under a microscope, etc. Name the base category.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 50 pages — is available in the English PDF.
Similar standards
How to Download GB/T 42330-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 42330-2023
$800.00