Valid

GB/T 41810-2022IoT identification system—Requirements of object identifier encoding and storage (English PDF)

物联网标识体系对象标识符编码与存储要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41810-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2022

Implementation date

May 1, 2023

Scope

GB/T 41810-2022 is the English-translated version of 物联网标识体系对象标识符编码与存储要求.

GB/T 41810-2022 sets out how object identifiers (OIDs) are encoded and stored in the media used by Internet of Things identification systems.

It specifies the OID coding structure and the conversion of an OID into binary encoding, then the storage methods and storage requirements in carriers such as two-dimensional barcodes and RFID tags, and the industry application of the identification system.

Its contents list adds informative appendices on encoding and storing an OID in RFID, in grid matrix code and in compact matrix code, and on applying the system in construction machinery manufacturing.

Clause 1 applies it to the construction and application of identification systems in the IoT field. Among the standards it quotes are GB/T 16263.1-2006 and GB/T 36461-2018. Issued on 14 October 2022, it has applied since 1 May 2023.

Found what you need?

Document preview — GB/T 41810-2022

National Standard of the People's Republic of China

ICS: 35.100.01
Classification: L 79

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 OID encoding of objects in the field of Internet of Things
5.1 OID coding structure
5.2 Binary encoding conversion of OID
6 Storage method and requirements of OID in media
6.1 Storage method
6.2 Storage requirements
6.3 Industry application of IoT identification system
Appendix A (informative) Encoding and storage method of OID mark in RFID
Appendix B (informative) Encoding and storage method of OID in GM code
Appendix C (informative) Encoding and storage method of OID in CM code
Appendix D (Informative) Application of IoT Identification System in Construction Machinery Manufacturing Industry
Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

1 Scope

This document specifies the encoding conversion requirements for object identifiers in the field of the Internet of Things and object identifiers in two-dimensional barcodes, RFID, etc. Encoding storage requirements in IoT media.

This document is applicable to the construction and application of the identification system in the field of Internet of Things.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 16263.1-2006 Information Technology ASN.1 Encoding Rules Part 1: Basic Encoding Rules (BER), Regular Encoding Regular (CER) and Atypical Encoding Rules (DER) Specifications

GB/T 16263.2-2006 Information Technology ASN.1 Encoding Rules Part 2: Compressed Encoding Rules (PER) Specification

GB/T 17969.1-2015 Operating procedures for information technology open systems interconnection OSI registration agencies Part 1: General procedures and the top-level arc of the international object identifier tree

GB/T 26231-2017 National Numbering System and Operating Procedures for Information Technology Open Systems Interconnection Object Identifiers (OID)

GB/T 27766-2011 Two-dimensional barcode grid matrix code

GB/T 27767-2011 Two-dimensional barcode compact matrix code

GB/T 28925-2012 Information Technology Radio Frequency Identification 2.45GHz Air Interface Protocol

GB/T 29768-2013 Information Technology Radio Frequency Identification 800/900MHz Air Interface Protocol

GB/T 36461-2018 Application Guidelines for OID Identification System of the Internet of Things

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Object identifier

A globally unique value associated with an object that unambiguously identifies the object.

Note: It can ensure the correct positioning and management of objects in communication or information processing. [Source: GB/T 17969.1-2015, 3.6.9, modified]

4 Abbreviations

The following abbreviations apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 43826-2024|GB/T 43957-2024|GB/T 44879-2024|GB/T 26231-2017|GB/T 47701-2026|GB/Z 185.1-2026

How to Download GB/T 41810-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.