Partners save 15% on every standard

Valid

GB/T 44879-2024Identification requirements of engineering machinery products based on OID (English PDF)

基于OID的工程机械产品标识要求

Open the GB/T 44879-2024 preview as PDF

Preview — first pages of GB/T 44879-2024 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 28, 2024

Implementation date

June 1, 2025

Scope

GB/T 44879-2024 is the English-translated version of 基于OID的工程机械产品标识要求.

GB/T 44879-2024 is the Chinese national standard covering the identifier that names a single machine inside a worldwide OID tree — the numbering rules and the branches given to the common technology nodes, to identification systems already in use, to third-party bodies and to the manufacturers themselves, the marking requirements that put the identifier on the machine, and the resolution requirements, without which the number cannot be turned back into data about the machine. An informative annex works the numbering through on real construction machinery products. First edition, in force from 1 June 2025. Issued on 28 November 2024, it has been in force since 1 June 2025.

Document preview — GB/T 44879-2024

National Standard of the People's Republic of China

ICS: 35.100.01
Classification: L 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface... III 1 Scope1
2 Normative references1
3 Terms and Definitions1
4 Abbreviations1
5 Numbering requirements1
5.1 Numbering Rules1
5.2 Basic common technology node numbering rules2
5.3 Node numbering rules of the existing identification system2
5.4 Third-party institution node numbering rules3
5.5 Enterprise Node Numbering Rules4
6 Labeling requirements4
7 Analysis Requirements4
Appendix A (Informative) OID Labeling Examples for Construction Machinery Products5
References6

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed and coordinated by the National Technical Committee for Information Technology Standardization (SAC/TC 28).

This document was drafted by: China Electronics Technology Standardization Institute, H3C Information Technology Co., Ltd., Guangzhou CESI Standard Testing Research Institute Institute Co., Ltd., Shenzhen CESI Information Technology Co., Ltd., Beijing CESI Technology Development Co., Ltd., Hangzhou Shenshi Energy Saving Technology Co., Ltd.

Co., Ltd., XCMG Construction Machinery Co., Ltd., China Construction Technology Group Co., Ltd., Zhongke Yungu Technology Co., Ltd., Sany Group Co., Ltd., Shandong Micro-Innovation Software Co., Ltd., China Classification Society, Yanshan University, China Industrial Internet Research Institute, Xuzhou Xugong Excavator Machinery Co., Ltd., Zhongkai Agricultural and Engineering University, Guangdong Tobacco Dongguan Co., Ltd., Guangzhou Shenfa Electromechanical Co., Ltd., Guangdong South China Technology Technology Transfer Center Co., Ltd., China Software Evaluation Center (Software and Integrated Circuit Promotion Center of the Ministry of Industry and Information Technology), Changchun Qipu Technology Information Consulting Co., Ltd., Guangzhou Shuyuan Changlian Technology Co., Ltd., Guangdong Qizhou Technology Co., Ltd., Fengtai Technology (Beijing) Co., Ltd.

Company, Beijing Jiaotong University, Zhejiang Tongji Vocational College of Science and Technology, Zhongneng Hi-Tech (Wuhan) Co., Ltd., China Construction Machinery Industry Association, Yiyuan Huaqin (Beijing) Technology Co., Ltd.

The main drafters of this document are: Han Hongqiang, Jia Gaopeng, Liu Xiaolei, Xu Luo, Jiang Fan, Dai Zhengming, Zhang Mingying, Li Chong, Wan Xiaolan, Zeng Tao, Zhang Yuanyuan, Wang Long, Shen Weili, Shen Zeqi, Wang Guiwang, Liu Wei, Zu Yanyan, Liu Caiyi, Su Yanjiang, Yuan Haifei, Luo Ying, Guo Yan, Zhang Yu, Li Mao, Ma Rui, Liu Tonglai, Wu Yitao, Wu Zhihao, Xie Yiming, Zhao Liang, Wang Huiying, Zheng Shuqiong, Lan Xuejun, Zhang Jun, Li Shuda.

OID-based product identification requirements for construction machinery

1 Scope

This document specifies the OID-based engineering machinery product identification numbering requirements, marking requirements and parsing requirements.

This document applies to the construction, application and maintenance of the engineering machinery product identification and resolution system.

2 Normative references

GB/T 13306

GB/T 26231

GB/T 35299

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 object identifier

A globally unique value associated with an object that unambiguously identifies the object and ensures that the object is correctly used in communications or information processing. Positioning and management.

[Source. GB/T 36461-2018, 3.2, modified]

4 Abbreviations

The following abbreviations apply to this document. OID. Object Identifier

5 Numbering requirements

5.1 Numbering Rules

The OID-based engineering machinery product identification numbering rules should comply with the relevant provisions of GB/T 26231 and adopt heterogeneous compatibility based on OID.

The identification system has a hierarchical structure. The engineering machinery product identification has a unique OID number, including the engineering machinery industry OID node number The identification number consists of three parts. number, next level node number and specific number. The identification numbering rules are shown in Figure 1.

Figure 1 Construction machinery product identification number rules

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 35299

Editions of GB/T 44879

Edition	Title	Revision	Status
GB/T 44879-2024	Identification requirements of engineering machinery products based on OID	current edition	Current

This page sells the current edition, GB/T 44879-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44879-2024

1Add to cart. Click the "Buy GB/T 44879-2024" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.