GB/T 41787.1-2022Ceiling installation for interior LED lighting equipment—Part 1: Specifications of mechanical interfaces and electrical interfaces (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

This document is part 1 of GB/T 41787 "Indoor LED Lighting Equipment Ceiling Mounting Interface". GB/T 41787 has been released the following parts.

--- Part 1: Specifications for mechanical and electrical interfaces.

Introduction

GB/T 41787 "Indoor LED Lighting Equipment Ceiling Installation Interface" is intended to be composed of two parts.

--- Part 1: Specifications for mechanical and electrical interfaces. The purpose is to establish the installation of indoor LED lighting equipment installed on the ceiling Technical requirements and test methods for fixing bases and connectors of interface devices.

--- Part 2: Control interface specification. The purpose is to establish the requirements at the technical level of the control interface, and to standardize other aspects including the control interface. Other interface technical requirements.

The issuing authority of this document draws attention to the fact that a declaration of compliance with this document may involve the use of the following 5 patents related to this document.

The patent application number and its patent name are as follows.

1 CN201710934323.1 A lamp fixing seat, a lamp connecting seat and a lamp fixing device

2 CN201710318041.9 A lamp holder, a lamp connector and a lamp holder

3 CN201410713020.3 A lamp fixture

4 CN201510737490.8 Fixing device for lamps, fixing base and connecting base

5 CN201810049826.5 A kind of lamp fixture

The issuing authority of this document has no position on the authenticity, validity and scope of this patent.

The patent holder has undertaken to the issuing body of this document that he is willing to agree with any applicant on reasonable and non-discriminatory terms or conditions to negotiate patent licensing. This patent holder's statement is on file with the issuing agency of this document.

Patent holder: OP Lighting Co., Ltd.

Address: Building A, Opu Lighting R&D, Fenyang Road, Fenhu Development Zone, Wujiang District, Suzhou City, Jiangsu Province.

Please note that in addition to the patents mentioned above, some content of this document may still involve patents. The issuing agency of this document does not undertake to identify the patent responsibility.

1 Scope

This document specifies the technical requirements and tests for the mechanical and electrical interfaces of ceiling-mounted interface devices for indoor LED lighting equipment. test method.

This document is applicable to power supply voltage not exceeding AC 250V, mass not exceeding 10kg, installed on indoor ceiling, protection against electric shock LED lighting equipment classified as Class I or Class II, dustproof, solid foreign body and waterproof grade classified as IP20 (hereinafter referred to as "LED lighting equipment"), including LED lighting equipment suitable for direct installation on the surface of ordinary combustible materials.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 2900.65 Electrical term lighting

GB/T 5169.10 Fire Hazard Test for Electrical and Electronic Products Part 10: Glow Wire/Basic Test Method for Glow Wire setup and general test methods

GB 7000.1-2015 Lamps Part 1: General Requirements and Tests

GB 7000.201 Lamps Part 2-1: Special Requirements Fixed General Lamps

GB 7000.202 Luminaires Part 2-2: Special Requirements Recessed Luminaires

GB/T 17465.1 Couplers for household and similar appliances - Part 1: General requirements

3 Terms and Definitions

The terms and definitions defined in GB/T 2900.65 and the following apply to this document.