GB/T 41724-2022Edge intelligence gateway architecture of cloud manufacturing service platform (English PDF)
云制造服务平台边缘智能网关架构
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41724-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2022
Implementation date
May 1, 2023
Scope
GB/T 41724-2022 is the English-translated version of 云制造服务平台边缘智能网关架构.
GB/T 41724-2022 describes the architecture of the edge intelligence gateway used in a cloud manufacturing service platform. It fixes the functional architecture and the requirements for the gateway's components, including the communication and driver components, the configuration tool, the edge data applications and the interface protocol.
It then gives the basic architectures for taking in sensor data, for taking in equipment data and for edge computing, the basic data types, the data interface requirements and the data exchange specification.
The data interface part covers the format of collection point data, how uploads are packaged and how often they are sent, and the interfaces for real-time acquisition and for running status.
It applies to the design and development of such gateways, cites GB/T 29826-2013, was issued on 14 October 2022 and has applied since 1 May 2023.
Found what you need?
Document preview — GB/T 41724-2022
National Standard of the People's Republic of China
- ICS
- 35.240.50
- Classification
- J 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 Functional Architecture and Component Requirements of Edge Intelligent Gateway
- 4.1 Functional Architecture Requirements
- 4.2 Communication and Drive Functional Component Requirements
- 4.3 Configuration Tool Requirements
- 4.4 Requirements for edge data applications
- 4.5 Interface Protocol Requirements
- 5 Basic Architecture Requirements
- 5.1 Basic architecture for accessing sensor data
- 5.2 Basic architecture for accessing device data
- 5.3 Basic Architecture for Edge Computing
- 6 Basic Data Type Requirements
- 7 Data Interface Requirements
- 7.1 Collection point data format
- 7.2 Packaging method for uploading from collection points
- 7.3 Frequency of data upload
- 7.4 Real-time data acquisition interface specification
- 7.5 Interface Specification for Data Collection of Running Status
- 8 Data Exchange Specification
- Appendix A (Informative) Example of IOT Call Interface Passing Parameters
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the basic functional architecture, functional components and the interface relationship between the edge intelligent gateway products of the cloud manufacturing service platform.
This document applies to the design and development of edge intelligent gateways for cloud manufacturing service platforms.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 29826-2013 Cloud Manufacturing Terminology
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
The terms and definitions defined in GB/T 29826-2013 and the following apply to this document.
3.1.1 Edge intelligent gateway
Comprehensive use of edge computing, industrial data intelligent analysis technology, data acquisition, data adaptive protocol adaptation and conversion, data model Edge-side industrial equipment with functions such as intelligent analysis.
3.1.2 Identification data
Describes the data that identifies the basic situation in order to meet the needs of equipment management.
3.1.3 Running data
Describes the raw data generated during the control and operation of equipment.
3.1.4 Event data
During the control and operation of the equipment, the alarm events, message events, etc. generated after the logical processing of the original data inside the equipment data.
3.1.5 Business data
In the process of equipment control and operation, after logical processing of the original data in the equipment, it can characterize its production and business conditions. data.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 41724-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29826-2013 — Cloud manufacturing - Terminology
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 41724-2022
$240.00