Valid

GB/T 41215-2021Space materials science experiment—Ground-based matching test specification (English PDF)

空间材料科学实验地面匹配试验规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41215-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 41215-2021 is the English-translated version of 空间材料科学实验地面匹配试验规范.

GB/T 41215-2021 sets out how ground-based matching tests are run for space materials science experiments. It divides them into single matching tests and integrated matching tests, and defines their purpose, when they are carried out, their content and the technical status of the items involved.

The test requirements cover general rules, tailoring of the test plan, the products and equipment taking part, documentation, environmental conditions and material preparation, and the duty mode during the test.

It also deals with organisation and the working group's division of labour, fault plans and troubleshooting, and the evaluation of results, including their validity and the completion criteria, with a normative annex giving the outline of the test programme. It was issued on 31 December 2021 and has applied since 1 July 2022.

Found what you need?

Document preview — GB/T 41215-2021

National Standard of the People's Republic of China

ICS: 49.025.01
Classification: V 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Test classification, purpose and test timing
4.1 Test classification
4.2 Test purpose
4.3 Test timing
5 Test content and technical status
5.1 Single matching test
5.2 Integrating Matching Experiment
6 Test requirements
6.1 General requirements
6.2 Tailoring the test plan
6.3 Requirements for products and equipment participating in the test
6.4 Documentation requirements
6.5 Environmental requirements and material preparation
6.6 Test duty mode
7 The organization, implementation and division of labor of the experiment
7.1 Organizational Implementation
7.2 Composition and division of labor of the working group
8 Fault plan and handling
8.1 Failure plan
8.2 Troubleshooting
9 Evaluation of test results
9.1 Summary
9.2 Evaluation of the validity of the results
9.3 Completion sign
Appendix A (normative) Outline for the preparation of ground matching test outline for space material science experiment

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the classification, purpose, test timing, content and technical status of ground matching tests for space material science experiments. requirements, organization, implementation and division of labor, failure plans and processing methods, and evaluation of test results.

This document is applicable to ground matching experiments for space material science experiments. Other relevant matching tests can be performed by reference.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 28877 General requirements for space science experiments

GB/T 30114.1 Terminology of space science and its application part 1. basic general

GB/T 30114.7 Terminology of Space Science and Its Application Part 7. Microgravity Science

GB/T 37469 Standard for the management of scientific experimental samples of space materials

GB/T 37844 Specification for preparation of solid experimental samples for space material science experiments

GB/T 38255 Requirements for analysis of space science experiments

3 Terms and Definitions

The terms and definitions defined in GB/T 30114.1 and GB/T 30114.7 and the following terms and definitions apply to this document.

3.1 Materials sample

A material object that can represent its physical and chemical properties and is used as a specific experimental object.

3.2 Experiment sample unit

Material samples or samples for experimental research and their packaging structures.

4 Test classification, purpose and test timing

4.1 Test classification

The ground matching test of space material science experiment can be divided into the following two categories.

a) single matching test;

b) Integrate matching class tests.

4.2 Purpose of the test

The purpose of the space material science experiment ground matching test is as follows:

a) Single match test. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

GB/T 42048-2022Selection requirements of space science and utilization project for manned spaceflight

Similar standards

GB/T 47842-2026|GB/T 47970-2026|GB/T 46132-2025|GB/T 41886-2022|GB/T 46904-2026|GB/T 44226-2024

How to Download GB/T 41215-2021

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.