Valid

GB/T 41198-2021Guidelines for validation and verification of forestry carbon projects (English PDF)

林业碳汇项目审定和核证指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41198-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

December 31, 2021

Scope

GB/T 41198-2021 is the English-translated version of 林业碳汇项目审定和核证指南.

GB/T 41198-2021 gives guidance for the validation and verification of forestry carbon sink projects, whose main purpose is to increase forest carbon sinks or reduce forest carbon emissions.

It sets the principles of objectivity, impartiality, conservativeness and confidentiality.

For validation it describes the procedure, from publicity of the project design document to the validation report, and what is examined: methodology, carbon pools, project boundaries, baseline scenario and additionality, land eligibility and tenure, the project's net sink increase, crediting period, monitoring plan and environmental and socioeconomic impacts.

For verification it covers the monitoring report, document and on-site checks, the verification report and project changes, with report formats in two normative annexes.

It applies to the China Voluntary Greenhouse Gas Emission Reduction Market, was issued on 31 December 2021 and has applied since 31 December 2021.

Found what you need?

Document preview — GB/T 41198-2021

National Standard of the People's Republic of China

ICS
65.020
Classification
B 65

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Basic principles of validation and certification
  • 4.1 Objectivity
  • 4.2 Impartiality
  • 4.3 Conservative
  • 4.4 Confidentiality
  • 5 Approval
  • 5.1 Validation procedure
  • 5.1.1 Project Design Document (PDD) Publicity
  • 5.1.2 Document validation
  • 5.1.3 On-site verification
  • 5.1.4 Validation report preparation
  • 5.2 Approval content and method
  • 5.2.1 Methodology
  • 5.2.2 Choice of carbon pool
  • 5.2.3 Project Boundaries
  • 5.2.4 Baseline scenario and additionality
  • 5.2.5 Eligibility of Land
  • 5.2.6 Land or forest tenure
  • 5.2.7 Calculation of project foreign exchange increase (or emission reduction)
  • 5.2.8 Crediting period option
  • 5.2.9 Monitoring plan
  • 5.2.10 Environmental and socioeconomic impacts
  • 6 Certification
  • 6.1 Certification procedure
  • 6.1.1 Publicity of monitoring report
  • 6.1.2 Document verification
  • 6.1.3 On-site verification
  • 6.1.4 Preparation of the verification report
  • 6.2 Verification content and method
  • 6.2.1 Project increase in foreign exchange (or emission reduction)
  • 6.2.2 Approval after project change
  • Appendix A (normative) Forestry carbon sink project validation report format
  • Appendix B (normative) Forestry Carbon Sink Project Verification Report Format
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document defines the basic principles for the validation and verification of forestry carbon sequestration projects, and provides the procedures and contents of the validation and verification of forestry carbon sequestration projects. and methodological guidance and suggestions.

This document is applicable to the validation and verification of forestry carbon sequestration projects in the China Voluntary Greenhouse Gas Emission Reduction Market, other carbon emission reduction mechanisms or under the market The validation and verification of forestry carbon sequestration projects can be used for reference.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Forestry Carbon Project

The main purpose of the project is to increase forest carbon sinks or reduce forest carbon emissions.

Note: Forestry carbon sink projects mainly include projects of afforestation, vegetation restoration, sustainable forest management, and avoiding deforestation and forest degradation.

3.2 Project design document; PDD

Activities, application of baselines and monitoring methodologies for proposed forestry carbon sequestration projects, project cycle, carbon crediting period, socioeconomic and environmental A text designed and described for environmental impacts and stakeholder evaluations.

3.3 Baseline scenario

In the absence of forestry carbon sink projects, it can reasonably represent the most likely future land use and management assumptions in the project area.

3.4 Project scenarios

Land use and management scenarios that occur within the project boundary under the forestry carbon sink project activity.

3.5 Carbon pool

During the carbon cycle, forest ecosystems store various components of carbon.

Note: Including aboveground living plant biomass, underground living plant biomass, litter, dead wood, soil and wood forest products.

3.6 Net anthropogenic greenhouse gas removal enhancement

Within the forestry carbon sink project boundary, the increase in the measurable carbon sink of each carbon pool between the baseline scenario and the project scenario.

Note: The amount of the increase in the project's sink is the amount of carbon issued by the China Voluntary Greenhouse Gas Emission Reduction Market Management Department (or the management department of other emission reduction mechanisms) issued by the forestry carbon sink project The amount of project emission reductions at the time of credit.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 41198-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41198-2021

$240.00