Valid

GB/T 41089-2021Technical specification for isolated lightning protection of electronic system based on lightning nowcasting and warning (English PDF)

基于雷电临近预警的电子系统隔离防雷技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41089-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 41089-2021 is the English-translated version of 基于雷电临近预警的电子系统隔离防雷技术规范.

GB/T 41089-2021 is a Chinese national technical specification for protecting electronic systems from lightning by isolating them when a lightning nowcast warns that a strike is imminent.

It applies to the low-voltage distribution lines and signal lines of electronic systems. The document sets the basic requirements, the methods and procedures for isolation and the way the effect of the protection is evaluated, with a normative annex on signal isolators and an informative annex on lightning warning levels.

It defines terms such as lightning nowcasting and warning, electronic system, target area and isolation. It does not apply where there is no backup power supply and operation must continue without interruption. It was issued on 31 December 2021 and has applied since 1 July 2022.

Found what you need?

Document preview — GB/T 41089-2021

National Standard of the People's Republic of China

ICS
91.120.40
Classification
M 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Basic requirements
  • 5 Methods and processes
  • 6 Effect evaluation
  • Appendix A (Normative) Signal Isolators
  • Appendix B (Informative) Lightning Imminent Warning Level
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the basic requirements, methods, procedures and effect evaluation of electronic system isolation lightning protection based on lightning imminent warning.

This document applies to the isolation and lightning protection of low-voltage distribution lines and signal lines in electronic systems.

This document does not apply to scenarios where there is no backup power supply and continuous operation is required.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 13997 2048kbit/s, 8448kbit/s, 34368kbit/s, 139264kbit/s optical transceiver technical requirements

GB/T 14048.3-2017 Low-voltage switchgear and controlgear-Part 3. Switches, isolators, isolating switches and fuse sets Combiner

GB/T 17626.5 Electromagnetic Compatibility Test and Measurement Technology Surge (Shock) Immunity Test

GB/T 21714.3 Lightning Protection Part 3. Physical Damage to Buildings and Danger to Life

GB/T 21714.4 Lightning Protection Part 4. Electrical and Electronic Systems in Buildings

GB/T 38121-2019 Lightning Protection Thunderstorm Warning System

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Lightning nowcasting and warning

Alerts the target area and surrounding areas for the occurrence of lightning in a period of time in the future.

3.2 Electronic system

Systems containing sensitive electronic components such as communications equipment, computers, control and instrumentation systems, radio systems, power electronics. [Source: GB/T 21714.1-2015, 3.29]

3.3 Target area

The geographic area where early warning is required to aid decision-making and take preventive measures before lightning-related events occur in that area. [Source: GB/T 38121-2019, 3.1.24]

3.4 Isolation

The ability to disconnect all power sources with sufficient clearance for safety reasons. [Source: GB/T 17045-2020, 3.41]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 41089-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41089-2021

$210.00