GB/T 41044-2021Guidelines for coalbed methane extraction in coal mining areas (English PDF)
煤矿区煤层气抽采指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41044-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 41044-2021 is the English-translated version of 煤矿区煤层气抽采指南.
GB/T 41044-2021 gives guidance for extracting coalbed methane from the surface in coal mining areas. It covers the general principles, the extraction methods and the management of health, safety and the environment.
It defines the coordinated development of coal and coalbed methane and follows the principle of extracting gas first and mining coal afterwards, with trial extraction tests evaluated to GB/T 34547 and extraction planned together with the underground mining plan.
Wells in planning, preparation and production areas of a mine should be designed for more than one use. Its references include the emission standard GB 21522, the gas drainage design code GB 50471 and safety rules for surface coalbed methane mining and gathering. It was issued on 31 December 2021 and has applied since 1 July 2022.
Found what you need?
Document preview — GB/T 41044-2021
National Standard of the People's Republic of China
- ICS
- 73.040
- Classification
- D 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General principles
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document provides general principles, extraction methods, and guidance for health, safety and environmental management of coalbed methane surface extraction in coal mining areas.
This document applies to the surface extraction of coalbed methane in coal mining areas.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB 21522 Coalbed Methane (Coal Mine Gas) Emission Standard (Provisional)
GB/T 34547 Detection and Evaluation of Coalbed Methane Surface Drainage Effects in Coal Mining Areas
GB 50471 Design Standard for Coal Mine Gas Drainage Engineering
AQ1081 Safety Regulations for Fire and Explosion-Proof CBM Surface Mining
AQ1082 Safety regulations for coalbed methane gathering and transportation
DZ/T 0250 Coalbed methane drilling operation specification
MT1035 Technical Specification for Gas Drainage Monitoring in Goaf
NB/T 10001 Code for operation of coalbed gas fracturing
NB/T 10009 Technical Specification for Drainage and Production of Coalbed Methane Wells
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Coordinated development of coal and CBM
Reasonable deployment of coalbed methane development projects and coal mining projects in terms of time and space to ensure the mutual development of coalbed methane and coal resources Promote and realize an effective and safe resource development model. [Source: GB/T 31537-2015, 2.25]
4 General principles
4.1 Surface extraction of coalbed methane in coal mining areas should comply with GB 21522, AQ1081, AQ1082 and Safety Regulations for Surface Development and Utilization of Coalbed Methane (Trial)", etc.
4.2 The surface extraction of coalbed methane in the coal mining area follows the principles of "gas extraction first, coal mining later" and "coordinated development of coal and coalbed methane", and realizes extraction first, then extraction, and extraction at the same time The mining and extraction standards shall be met, the effective connection of gas and coal mining shall be promoted, and the orderly utilization of coalbed methane and coal resources shall be ensured.
4.3 The ground pre-drainage of coalbed methane in the coal mining area should first carry out a trial extraction test to evaluate the effect of the trial extraction. The evaluation of the extraction effect should be in accordance with GB/T 34547 implement. Combined with the underground mining plan of the coal mine, the surface extraction of coalbed methane in different production stages and areas of the coal mine is determined.
4.4 Coal mine planning area, coal mine preparation area, and coal mine production area should take into account the multi-purpose functions of one well.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 21522Emission standard of coalbed methane (coal mine gas)
- GB/T 34547Specification for detection and evaluation of coalbed methane surface drainage effect in coal mine
- GB 50471Coal Mine Gas Drainage Engineering Design Standard
- DZ/T 0250Specifications for coalbed methane drilling engineering
- NB/T 10001Code for operation of CBM fracturing
- NB/T 10009Technical specification for coalbed gas well production
AQ1081 · AQ1082 · MT1035
Similar standards
How to Download GB/T 41044-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DZ/T 0250-2010 — Specifications for coalbed methane drilling engineering
GB 21522-2024 — Emission standard of coalbed methane (coal mine gas)
GB 50471-2018 — Coal Mine Gas Drainage Engineering Design Standard
Secure payment via Stripe
Payments accepted
GB/T 41044-2021
$90.00