GB/T 40361-2021Beer, carbonated beverage cans filling production line—General technical specifications (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the terms and definitions, model, type, composition, and production capacity selection of beer and carbonated beverage can filling production lines And working conditions, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage.

This document is applicable to cans as packaging containers, and the production capacity of beer or carbonated beverages for filling and sealing is greater than or equal to 300 Can/min production line (hereinafter referred to as "production line").

This document does not apply to ultra-clean filling and aseptic filling.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 191 Packaging, storage and transportation pictorial signs

GB 2894 Safety signs and guidelines for their use

GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components

GB/T 4928 Beer analysis method

GB/T 5226.1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1: General technical conditions

GB 5749 Sanitary Standard for Drinking Water

GB/T 6543 Single corrugated box and double corrugated box for transport packaging

GB/T 7311 Packaging Machinery Classification and Model Establishment Method

GB/T 7932 General rules and safety requirements for pneumatic systems and their components

GB/T 8196 General requirements for the design and manufacture of fixed and movable protective devices for mechanical safety protection devices

GB/T 9106.1 Two-piece cans for packaging containers Part 1: Aluminum easy-open lid aluminum cans

GB/T 9106.2 Two-piece cans for packaging containers Part 2: Aluminum easy-open lid steel cans

GB/T 13277.1-2008 Compressed Air Part 1: Pollutant Purification Level

GB/T 13306 signs

GB/T 13384 General technical conditions for packaging of mechanical and electrical products

GB 16798 Food Machinery Safety and Hygiene

GB/T 17590 Aluminum easy-open lid three-piece can

GB/T 17888 (all parts) Safe entry of machinery into fixed facilities of machinery

GB/T 19787 packaging material polyolefin heat shrinkable film

GB/T 19891 Machinery Safety Hygienic Requirements for Machinery Design

GB/T 23821 Safety distance for machinery to prevent the upper and lower limbs from touching the danger zone

JB/T 7232 Simple method for measuring sound power level of packaging machinery noise

JJF1070-2005 Quantitative packaging commodity net content measurement and inspection rules