GB/T 39588-2020Requirements and test methods for electrostatic shielding packaging bags (English PDF)
静电屏蔽包装袋要求及检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39588-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39588-2020 is the English-translated version of 静电屏蔽包装袋要求及检测方法.
GB/T 39588-2020 is the Chinese standard "Requirements and test methods for electrostatic shielding packaging bags".
Its scope clause reads: This standard specifies the technical requirements, testing methods, inspection rules, signs and packaging for electrostatic shielding packaging bags (hereinafter referred to as "shielding bags") Loading, transportation and storage: This standard applies to shielding bags for packaging electrostatic sensitive components and electronic products: This standard does not apply to shielding bags for packaging volatile substances, chemicals, and explosives:. Its clauses include terms and definitions; technical requirements.
Found what you need?
Document preview — GB/T 39588-2020
National Standard of the People's Republic of China
- ICS
- 17.220.20
- Classification
- L 85
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4:1 Appearance
- 4:2 Dimensional deviation
- 4:3 Sealing strength
- 4:4 Puncture resistance
- 4:5 Surface resistance
- 4:6 Internal induced electric energy
- 5 Detection method
- 5:1 Appearance
- 5:2 Dimensional deviation
- 5:3 Sealing strength
- 5:4 Puncture resistance
- 5:5 Surface resistance
- 5:6 Internal induced electric energy
- 6 Inspection rules
- 6:1 Inspection classification
- 6:2 Factory inspection
- 6:3 Type inspection
- 7 Sign
- 8 Packaging, transportation and storage
- Appendix A (informative appendix) Structure of test probe and sample holding platform for puncture resistance testing
- Appendix B (informative appendix) Self-inspection method of induced electric energy test device in shielding bag
1 Scope
This standard specifies the technical requirements, testing methods, inspection rules, signs and packaging for electrostatic shielding packaging bags (hereinafter referred to as "shielding bags")
Loading, transportation and storage:
This standard applies to shielding bags for packaging electrostatic sensitive components and electronic products:
This standard does not apply to shielding bags for packaging volatile substances, chemicals, and explosives:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 191 Packaging, Storage and Transportation Graphic Mark
GB/T 2828:1 Sampling inspection procedure by attributes Part 1: Batch inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 15463 Electrostatic safety terms
GB/T 16288 Marking of plastic products
GB/T 32304 Electrostatic protection requirements for aerospace electronic products
3 Terms and definitions
The following terms and definitions defined in GB/T 191, GB/T 15463, GB/T 16288, and GB/T 32304 apply to this document:
For ease of use, some terms and definitions in GB/T 15463 are listed repeatedly below
3:1
Electrostaticshielding
In order to avoid the influence of the external electrostatic field on the charged or uncharged body, or to avoid the influence of the electrostatic field of the charged body on the outside world,
A measure in which charged or non-charged objects are placed in a grounded closed or nearly closed metal shell or metal grid:
[GB/T 15463-2018, definition 5:37]
3:2
Electrostaticshieldingpackagingbag
Electrostaticdischargeprotectionshieldingpackagingbag
A flexible packaging bag with electrostatic shielding performance and electrostatic leakage performance on the inner surface of directly contacting electrostatic sensitive products:
4 Technical requirements
4:1 Appearance
The appearance of the shielding bag should meet the following requirements:
a) The outer surface should be clean, free from damage, wrinkles, stains, etc:, and the material should not contain any fragile, easy-to-fall or easy-to-erasable materials;
b) No delamination, brittle cracks, pores, cuts, scratches and other process defects;
c) No unevenness, pinholes, cracks, trachoma, spots, foreign objects, fish eyes, gel spots and other structural defects;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39588-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39588-2020
$240.00