GB/T 39307-2020Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring (English PDF)
荧光增白剂 色光和增白强度的测定 塑料着色法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39307-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 39307-2020 is the English-translated version of 荧光增白剂 色光和增白强度的测定 塑料着色法.
GB/T 39307-2020 is the Chinese standard "Fluorescent whitening agents—Determination of shade and relative whiteness—Plastic coloring". Its scope clause reads: This standard specifies the method for determining the shade and whitening intensity of fluorescent whitening agents.
This standard is applicable to the determination of the shade and whitening intensity of fluorescent whitening agents by the plastic coloring method. Its clauses include principle; materials; equipment; test procedure.
Found what you need?
Document preview — GB/T 39307-2020
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 materials
- 5 Equipment
- 6 Test procedure
1 Scope
This standard specifies the method for determining the shade and whitening intensity of fluorescent whitening agents.
This standard is applicable to the determination of the shade and whitening intensity of fluorescent whitening agents by the plastic coloring method.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2374-2017 Regulations of general conditions for dye dyeing determination
GB/T 9338-2008 Fluorescent whitening agent relative whiteness determination instrument method
3 Principle
Prepare the resin whitening board under the same conditions with the fluorescent whitening agent sample and the standard sample of the same species. Then take the standard sample swatch
The color intensity is 100 points, and the color light is the standard. Visual comparison is performed to evaluate the color light and intensity of the sample color plate. Or use a colorimeter to measure color, then
Then calculate the shade and whitening intensity of the sample color plate.
4 materials
Special polyvinyl chloride resin (PVC) plastic particles. the whiteness of the blank pressing board is not less than 50, no fluorescence, and stored under dry and ventilated conditions
The period does not exceed three years.
5 Equipment
5.1
Screw injection molding machine and flat mold for laboratory use.
5.2
Analytical balance with an accuracy of 0.0001g.
5.3 Whiteness meter or colorimeter
Comply with the relevant regulations in Chapter 4 of GB/T 9338-2008.
6 Test procedure
6.1 Determination of fluorescent whitening agent standard
The fluorescent whitening agent standard product is the reference product used to determine the whitening intensity and shade, which is determined by the supplier and the buyer through negotiation and sealed together.
6.2 Determination of general conditions
Fluorescent brightener dosage. generally 0.01%~0.2% of the resin dosage, and the specific depth is stipulated in the product standard of each fluorescent brightener.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39307-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39307-2020
$55.00