GB/T 39295-2020Determination of the tack for water based adhesive (English PDF)
水性胶粘剂触粘性的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39295-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
October 1, 2021
Scope
GB/T 39295-2020 is the English-translated version of 水性胶粘剂触粘性的测定.
GB/T 39295-2020 is the Chinese standard "Determination of the tack for water based adhesive". Its scope clause reads: This standard specifies the method for measuring the tackiness of water-based adhesives.
This standard applies to the determination of the tackiness of water-based adhesives. It is also suitable for the determination of the tackiness of solvent-based adhesives.
Its clauses include terms and definitions; principle; test equipment and instruments.
Found what you need?
Document preview — GB/T 39295-2020
National Standard of the People's Republic of China
- ICS
- 83.180
- Classification
- G 38
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Test equipment and instruments
1 Scope
This standard specifies the method for measuring the tackiness of water-based adhesives.
This standard applies to the determination of the tackiness of water-based adhesives. It is also suitable for the determination of the tackiness of solvent-based adhesives.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2943 Adhesive Terms
GB/T 30779-2014 Water-based polyurethane adhesive for shoes
3 Terms and definitions
The terms and definitions defined in GB/T 2943 apply to this document.
4 Principle
The maximum value of the force when the sizing surface of the two adhesive test pieces is separated after light force and short-term contact within the operating time of the adhesive.
It is the tackiness of the adhesive.
5 Test equipment and instruments
5.1 Touch adhesion tester
The range is 0N~100N, the force value error is not more than 1%, and the gripper separation speed is (100±10) mm/min.
5.2 Fixture
5.2.1
The upper and lower clamps (see Figure 1) have flat surfaces and good clamping performance. The specimen does not slide after clamping.
5.2.2
The upper fixture consists of an inner core and an outer jacket, with a total mass of (200 ± 1) g.
The inner core is cylindrical with a diameter D=(20±0.5)mm.
The outer shell has a semicircular ring shape, and the inner diameter is matched with the thickness of the test material used, with a length (30 ± 3) mm and a width (20 ± 2) mm in the middle.
The window is used to expose the sample.
5.2.3
The lower clamp is rectangular, with a length of (100±1)mm and a width of (20±0.1)mm, fixed on the tensile machine.
The size of the outer shell is compatible with the inner core, and there is a window with a length of 15mm~20mm in the middle for exposing the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39295-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39295-2020
$90.00