GB/T 39251-2020Additive manufacturing—Methods to characterize performance of metal powders (English PDF)
增材制造 金属粉末性能表征方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39251-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39251-2020 is the English-translated version of 增材制造 金属粉末性能表征方法.
GB/T 39251-2020 is the Chinese standard "Additive manufacturing—Methods to characterize performance of metal powders". Its scope clause reads: This standard specifies the test items, sampling, test methods and test reports for the performance characterization of metal powders for additive manufacturing.
This standard applies to metal powders for additive manufacturing. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39251-2020
National Standard of the People's Republic of China
- ICS
- 25.030
- Classification
- H 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Hollow powder
1 Scope
This standard specifies the test items, sampling, test methods and test reports for the performance characterization of metal powders for additive manufacturing.
This standard applies to metal powders for additive manufacturing.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 223 (all parts) Steel and alloy
GB/T 1479.1 Determination of bulk density of metal powder Part 1.Funnel method
GB/T 1479.2 Determination of the bulk density of metal powders Part 2.Scout volumetric method
GB/T 1480 Metal powder dry sieving method for determination of particle size
GB/T 1482 Standard funnel method for determination of fluidity of metal powder (Hall flow meter)
GB/T 3500 Terminology of Powder Metallurgy
GB/T 4698 (all parts) Sponge titanium, titanium and titanium alloy chemical analysis methods
GB/T 5121 (all parts) Methods for chemical analysis of copper and copper alloys
GB/T 5161 Determination of effective density of metal powders by liquid immersion method
GB/T 5162 Determination of Tap Density of Metal Powder
GB/T 5314 Powder sampling method for powder metallurgy
GB/T 13748 (all parts) Methods for chemical analysis of magnesium and magnesium alloys
GB/T 16418 Terminology of particle system
GB/T 16913 Dust physical properties test method
GB/T 19077 Particle size distribution laser diffraction method
GB/T 20975 (all parts) Aluminum and aluminum alloy chemical analysis methods
GB/T 21649.2-2017 Particle Size Analysis Image Analysis Method Part 2.Dynamic Image Analysis Method
GB/T 29070 General requirements for non-destructive testing of industrial computer tomography (CT) testing
GB/T 35351 Terminology for Additive Manufacturing
YS/T 539 (all parts) chemical analysis method for nickel-based alloy powder
YS/T 1297 Determination of sphericity of titanium and titanium alloy powder
3 Terms and definitions
The following terms and definitions defined in GB/T 3500, GB/T 16418, and GB/T 35351 apply to this document. For ease of use,
Some terms and definitions in GB/T 16418 are repeatedly listed below.
3.1 Hollow powder
The inside contains metal powder with closed pores.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 43895-2024Additive manufacturing - Materials - Mould steel powders
- GB/T 44194-2024Additive manufacturing—Technical specification for reuse of metal powder
- GB/T 44239-2024Aluminum alloy powder for additive manufacturing
- GB/T 42621-2023Additive manufacturing—Specification for hybrid additive manufacturing with directed energy deposition and milling process
- GB/T 43484-2023Additive manufacturing - Supperalloy powder used for laser powder bed fusion
Similar standards
How to Download GB/T 39251-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39251-2020
$105.00