Valid

GB/T 39214-2020Integrity requirements of section fabrication for ship (English PDF)

船舶总段制造完整性要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39214-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39214-2020 is the English-translated version of 船舶总段制造完整性要求.

GB/T 39214-2020 is the Chinese standard "Integrity requirements of section fabrication for ship". Its scope clause reads: This standard specifies the integrity requirements and status confirmation of the manufacturing structure, outfitting and painting of the ship's general section.

This standard applies to bulk carrier, oil tanker, container ship general section (except superstructure) manufacturing integrity construction and status confirmation, other types of ships can refer to implementation. Its clauses include terms and definitions; structural integrity requirements.

Found what you need?

Document preview — GB/T 39214-2020

National Standard of the People's Republic of China

ICS
47.020.01
Classification
U 06

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Structural integrity requirements

1 Scope

This standard specifies the integrity requirements and status confirmation of the manufacturing structure, outfitting and painting of the ship's general section.

This standard applies to bulk carrier, oil tanker, container ship general section (except superstructure) manufacturing integrity construction and status confirmation, other types of ships can refer to implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 12924 Ship Technology Terminology Hull Construction and Installation Technology

GB/T 34000-2016 China Shipbuilding Quality Standard

GB/T 39036 Integrity requirements for ship block manufacturing

3 Terms and definitions

The following terms and definitions defined in GB/T 12924 and GB/T 39036 apply to this document.

3.1 Total segment

According to the technical requirements of the hull construction and the characteristics of the hull structure, the main hull is divided horizontally along the length of the ship to form the annular section of the hull.

Or a section composed of several sections.

3.2 Overall manufacturing integrity

According to the requirements of the drawings, complete the general section structure, outfitting and painting operations and complete the related inspection work, and the results meet the requirements of the corresponding technical specifications.

4 Structural integrity requirements

4.1 Assembly

4.1.1

All sub-butting structures in the main section are installed completely, the structure is assembled correctly, and the attachments installed in the main section should be installed completely.

4.1.2

The forming deviation of various components in the general section shall meet the requirements of 5.1.5 in GB/T 34000-2016.

4.1.3

The assembly of the welding and closing area of the main section shall meet the requirements of 5.1.6 in GB/T 34000-2016.

4.1.4

The flatness of the deck, bulkhead and outer plating of the general section shall meet the requirements of 5.1.8 in GB/T 34000-2016.

4.1.5

The assembly and inspection of structural monitoring nodes should meet the requirements of the drawings and make records.

4.1.6

The process holes used by the main assembly and loading should be completed according to the drawing requirements, and the orifice plate should be fixed and marked nearby.

4.1.7

The attachments at the loading stage should be attached complete and firm.

4.1.8

The total section installed with the stern tube/rudder system structure shall be protected inside the stern tube/rudder hole during construction.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39214-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39214-2020

$90.00