Valid

GB/T 39199-2020Characterization and testing methods of recycled polyethylene (PE) (English PDF)

聚乙烯(PE)塑料再生料的表征特性及检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39199-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39199-2020 is the English-translated version of 聚乙烯(PE)塑料再生料的表征特性及检测方法.

GB/T 39199-2020 is the Chinese standard "Characterization and testing methods of recycled polyethylene (PE)". Its scope clause reads: This standard specifies the important characterization characteristics, testing methods and quality assurance of polyethylene (PE) plastic recycled materials.

This standard applies to the quality control and evaluation of polyethylene (PE) plastic recycled materials. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39199-2020

National Standard of the People's Republic of China

ICS
83.080
Classification
G 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Polyethylene (PE) plastic recycled materials

1 Scope

This standard specifies the important characterization characteristics, testing methods and quality assurance of polyethylene (PE) plastic recycled materials.

This standard applies to the quality control and evaluation of polyethylene (PE) plastic recycled materials.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 1033.1-2008 Determination of the density of plastic non-foam plastics Part 1.Immersion method, liquid pycnometer method and titration method

GB/T 1040.1 Determination of tensile properties of plastics Part 1.General

GB/T 1040.2 Determination of tensile properties of plastics Part 2.Test conditions for molding and extrusion plastics

GB/T 1040.3 Determination of tensile properties of plastics Part 3.Test conditions for films and sheets

GB/T 1043.1 Determination of impact performance of plastic simply supported beams Part 1.Non-instrumented impact test

GB/T 1843 Determination of impact strength of plastic cantilever beam

GB/T 1845.2 Plastic Polyethylene (PE) Molding and Extrusion Materials Part 2.Sample Preparation and Performance Determination

GB/T 2035 Plastic Terms and Definitions

GB/T 2411 Use a hardness tester to determine the indentation hardness (Shore hardness) of plastics and hard rubber

GB/T 2547 Plastic sampling method

GB/T 3682.1 Plastic thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR) measurement

Part 1.Standard Methods

GB/T 6284 General method for determination of moisture in chemical products by drying loss method

GB 6675.4 Toy Safety Part 4.Migration of Specific Elements

GB/T 9341 Determination of plastic bending properties

GB/T 9345.1-2008 Determination of Ash in Plastic Part 1.General Method

GB/T 9352-2008 Compression molding of plastic thermoplastic material samples

GB/T 21843 Plastic Vinyl Chloride Homopolymerization and Copolymerization Resins Used for Mechanical Sieve Determination of Particle Size

GB/T 26125 Determination of six restricted substances in electrical and electronic products (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers)

GB/T 26193 Determination of migrating elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy materials inductively coupled plasma mass spectrometry

3 Terms and definitions

The following terms and definitions defined in GB/T 2035 apply to this document.

3.1 Polyethylene (PE) plastic recycled materials

After processing the waste polyethylene plastic through pretreatment (classification, cleaning, crushing, drying, etc.), melting granulation or modification, etc.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39199-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39199-2020

$150.00