GB/T 39075.203-2023Organic light emitting diode(OLED)light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting:

This document is Part 2-3 of GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting":

GB/T 39075 has released the following parts:

---Part 1: General requirements and tests;

---Part 2-1: Special requirements for semi-integrated OLED modules;

---Part 2-2: Special requirements for integrated OLED modules;

---Part 2-3: Special requirements for flexible OLED light sheets and panels:

This document is equivalent to IEC 62868-2-3:2021 "Safety of organic light-emitting diodes (OLED) light sources for general lighting - Part 2-3 Points: Special Requirements for Flexible OLED Light Sheets and Panels:

This document has made the following minimal editorial changes:

---Added table notes in Table 1:

Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:

Introduction

As a new generation of light source, OLED light source, the current product structure has gradually shifted from low-end products to mid-to-high-end products, and OLED the market demand for our products continues to rise: GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting" passed the specification the safety requirements of OLED light sources have positive significance for promoting the development of new industrialization and promoting the sustainable development of the national economy:

With the expansion of the market application scope of OLED products, in order to better standardize the safe use and testing of OLED products, according to the classification of OLED products further refines safety requirements: GB/T 39075 aims to standardize organic light-emitting diodes (OLED) for general lighting the light source safety requirements are planned to be composed of four parts:

---Part 1: General requirements and tests: The purpose is to establish the application of organic light-emitting diode (OLED) panels for general lighting:

Basic test requirements and test conditions for safety requirements:

---Part 2-1: Special requirements for semi-integrated OLED modules: The purpose is to establish that semi-integrated OLED modules are different from other Test requirements and test conditions for other OLED products:

---Part 2-2: Special requirements for integrated OLED modules: The purpose is to establish that integrated OLED modules differ from other Test requirements and test conditions for OLED products:

---Part 2-3: Special requirements for flexible OLED light sheets and panels: The purpose is to establish the difference between flexible OLED light sheets and panels Test requirements and test conditions for other OLED products:

Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-3: Special Requirements Flexible OLED light sheets and panels

1 Scope

This document specifies the safety requirements for flexible organic light-emitting diode (OLED) light sheets and panels used for indoor and similar general lighting applications:

This type of OLED light sheets and panels are designed for curved lamp manufacturing:

This document applies to flexible OLED light sheets and panels powered by no more than 120V ripple-free DC power supply:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 39075.1-2023 Safety of organic light-emitting diode (OLED) light sources for general lighting Part 1: General requirements and Test (IEC 62868-1:2020, IDT) IEC 61747-40-1:2019 Liquid crystal display equipment Part 40-1: Guide for mechanical testing of display cover glass for mobile devices vices-Guidelines) IEC 62504 General lighting LED products and related equipment terms and definitions [General lighting-Lightemittingdi-Note: GB/T 24826-2016 Terms and definitions for LED products and related equipment for general lighting (IEC 62504:2014, IDT) IEC 62715-6-3:2020 Flexible display devices Part 6-3: Mechanical test methods impact and hardness testing (Flexibledis-IEC TS62972 General lighting organic light-emitting diode (OLED) products and related equipment terms and definitions [General tions]

3 Terms and definitions

The following terms and definitions as defined in IEC 62504, GB/T 39075.1-2023 and IEC TS62972 apply to this document:

flexibleOLED flexibleOLED OLEDs that can be mechanically bent during one or more steps of substrate processing, manufacturing, storage, use, handling, transportation and reinstallation:

flexibleOLEDtile flexibleOLEDtile A flexible OLED light source with minimal functionality, including at least one positive and negative contact each connected to the power supply and which cannot be split into Smaller lighting elements: