GB/T 39075.201-2023Organic light emitting diode(OLED)light sources for general lighting - Safety - Part 2-1: Particular requirements - Semi-integrated OLED modules (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting:

This document is Part 2-1 of GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting":

GB/T 39075 has released the following parts:

---Part 1: General requirements and tests;

---Part 2-1: Special requirements for semi-integrated OLED modules;

---Part 2-2: Special requirements for integrated OLED modules;

---Part 2-3: Special requirements for flexible OLED light sheets and panels:

This document is equivalent to IEC 62868-2-1:2020 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting Part 2-1" Points: Special Requirements Semi-Integrated OLED Module":

Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:

Introduction

As a new generation of light source, OLED light source, the current product structure has gradually shifted from low-end products to mid-to-high-end products, and OLED the market demand for our products continues to rise: GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting" passed the specification the safety requirements of OLED light sources have positive significance for promoting the development of new industrialization and promoting the sustainable development of the national economy:

With the expansion of the OLED product market application scope, in order to better standardize the safe use and testing of OLED products, according to OLED Product classification further refines safety requirements: GB/T 39075 aims to standardize the safety of organic light-emitting diodes (OLED) light sources for general lighting:

The complete requirements are planned to be composed of 4 parts:

---Part 1: General requirements and tests: The purpose is to establish the application of organic light-emitting diode (OLED) panels for general lighting:

Basic test requirements and test conditions for safety requirements:

---Part 2-1: Special requirements for semi-integrated OLED modules: The purpose is to establish that semi-integrated OLED modules are different from other Test requirements and test conditions for other OLED products:

---Part 2-2: Special requirements for integrated OLED modules: The purpose is to establish that integrated OLED modules differ from other Test requirements and test conditions for OLED products:

---Part 2-3: Special requirements for flexible OLED light sheets and panels: The purpose is to establish the difference between flexible OLED light sheets and panels Test requirements and test conditions for other OLED products:

Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-1: Special Requirements Semi-integrated OLED module

1 Scope

This document specifies the safety requirements for semi-integrated organic light-emitting diode modules:

Semi-integrated organic light-emitting diode module that operates with an external control device connected to the supply voltage: In addition, the module's internal Has a control device to allow the module to operate under constant voltage, constant current or constant power conditions:

This document applies to rated voltage not exceeding 120V ripple-free DC voltage or effective value 50V, frequency 50Hz or 60Hz AC Semi-integrated organic light-emitting diode module operating under voltage conditions:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 7000.1-2023 Luminaires Part 1: General requirements and tests (IEC 60598-1:2020, MOD) Note: There is no technical difference between the quoted content of GB/T 7000.1-2023 and the quoted content of IEC 60598-1:2017:

GB/T 19510.1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD) Note: There is no technical difference between the quoted content of GB/T 19510.1-2023 and the quoted content of IEC 61347-1:2017:

GB/T 39075.1-2023 Safety of organic light-emitting diode (OLED) light sources for general lighting Part 1: General requirements and Test (IEC 62868-1:2020, IDT) IEC 62504 General lighting LED products and related equipment terms and definitions [General lighting-Lightemitting Note: GB/T 24826-2016 Terms and definitions for LED products and related equipment for general lighting (IEC 62504:2014, IDT) IEC 60838-2-2 Miscellaneous lampholders Part 2-2: Special requirements for LED module connectors (Miscelaneouslamphol Note: GB/T 19651.3-2008 Miscellaneous lamp holders Part 2-2: Special requirements for connectors for LED modules (IEC 60838-2-2:2006, IDT) IEC TS62972 General lighting organic light-emitting diode (OLED) products and related equipment terms and definitions [General tions]

3 Terms and definitions

The following terms and definitions as defined in IEC 62504, GB/T 39075.1-2023 and IEC TS62972 apply to this document:

Under normal operating conditions, and at the rated voltage/current/power or the maximum value of the rated voltage/current/power range, OLED