GB/T 39075.202-2023Organic light emitting diode(OLED)light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules (English PDF)

Foreword

This document complies with the regulations of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Custom drafting:

This document is Part 2-2 of GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting":

GB/T 39075 has released the following parts:

---Part 1: General requirements and tests;

---Part 2-1: Special requirements for semi-integrated OLED modules;

---Part 2-2: Special requirements for integrated OLED modules;

---Part 2-3: Special requirements for flexible OLED light sheets and panels:

This document is equivalent to IEC 62868-2-2:2020 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Illumination Part 2-2" Points: Special Requirements for Integrated OLED Modules:

This document has made the following minimal editorial changes:

---Chapter 15 "Lamp design information, see Appendix A" is corrected to "Lamp design information, see Appendix B of GB/T 39075.1-2023":

Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:

Introduction

As a new generation of light source, OLED light source, the current product structure has gradually shifted from low-end products to mid-to-high-end products, and OLED the market demand for our products continues to rise: GB/T 39075 "Safety of Organic Light-Emitting Diode (OLED) Light Sources for General Lighting" This document by standardizing the safety requirements of OLED light sources, it will have a positive impact on promoting the development of new industrialization and promoting the sustainable development of the national economy:

meaning: With the expansion of the market application scope of OLED products, in order to better standardize the safe use and testing of OLED products, based on Safety requirements are further refined according to the classification of OLED products: GB/T 39075 aims to standardize organic light-emitting diodes for general lighting (OLED) light source safety requirements are planned to be composed of 4 parts:

---Part 1: General requirements and tests: The purpose is to establish the application of organic light-emitting diode (OLED) panels for general lighting:

Basic test requirements and test conditions for safety requirements:

---Part 2-1: Special requirements for semi-integrated OLED modules: The purpose is to establish that semi-integrated OLED modules are different from other Test requirements and test conditions for other OLED products:

---Part 2-2: Special requirements for integrated OLED modules: The purpose is to establish that integrated OLED modules differ from other Test requirements and test conditions for OLED products:

---Part 2-3: Special requirements for flexible OLED light sheets and panels: The purpose is to establish the difference between flexible OLED light sheets and panels Test requirements and test conditions for other OLED products:

Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-2: Special Requirements Integrated OLED module

1 Scope

This document specifies the safety requirements for integrated organic light-emitting diode (OLED) modules:

This document is applicable to a ripple-free DC power supply not exceeding 1000V or not exceeding an effective value of 1000V, with a frequency of 50Hz or 60Hz:

OLED module powered by current power supply:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 7000.1-2023 Luminaires Part 1: General requirements and tests (IEC 60598-1:2020, MOD) Note: There is no technical difference between the quoted content of GB/T 7000.1-2023 and the quoted content of IEC 60598-1:2017:

GB/T 19510.1-2023 Light source control device Part 1: General requirements and safety requirements (IEC 61347-1:2017, MOD) Note: There is no technical difference between the quoted content of GB/T 19510.1-2023 and the quoted content of IEC 61347-1:2017:

GB/T 39075.1-2023 Safety of organic light-emitting diode (OLED) light sources for general lighting Part 1: General requirements and Test (IEC 62868-1:2020, IDT) Note: GB/T 19651.3-2008 Miscellaneous lamp holders Part 2-2: Special requirements for connectors for LED modules (IEC 60838-2-2:2006, IDT) IEC 62504 General lighting LED products and related equipment terms and definitions [General lighting-Lightemittingdi-Note: GB/T 24826-2016 Terms and definitions for LED products and related equipment for general lighting (IEC 62504:2014, IDT) IEC TS62972 General lighting organic light-emitting diode (OLED) products and related equipment terms and definitions [General tions]

3 Terms and definitions

The following terms and definitions as defined in GB/T 39075.1-2023, IEC 62504 and IEC TS62972 apply to this document:

OLED modules designed to be installed individually or placed in similar devices such as luminaires, add-on boxes or enclosures:

NOTE: Stand-alone OLED modules provide all necessary safety protections according to their classification and marking: