Valid

GB/T 38929-2020General requirements of mirror milling process for civil aircraft skin parts (English PDF)

民用飞机蒙皮镜像铣削工艺通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38929-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2020

Implementation date

January 1, 2021

Scope

GB/T 38929-2020 is the English-translated version of 民用飞机蒙皮镜像铣削工艺通用要求.

GB/T 38929-2020 is the Chinese standard "General requirements of mirror milling process for civil aircraft skin parts". Its scope clause reads: This standard specifies the general requirements for mirror milling of skin parts, feature definition and classification, programming methods, process flow, and quality control.

This standard applies to the mirror milling of metal skin parts for civil aircraft. Other products can be implemented by reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38929-2020

National Standard of the People's Republic of China

ICS
49.040
Classification
V 18

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General requirements
  • 4.1 Personnel
  • 4.2 Material
  • 4.3 Equipment and Tooling
  • 4.4 Security Protection
  • 5 Feature definition and classification
  • 5.1 Feature definition
  • 5.2 Classification of Sag Features
  • 5.3 Window feature classification
  • 5.4 Hole feature classification
  • 5.5 Classification of boss features
  • 5.6 Contour feature classification
  • 6 Programming method
  • 6.1 General
  • 6.2 Mirror milling programming of face features
  • 6.3 Mirror milling programming of depressed features
  • 6.4 Window feature programming
  • 6.5 Milling programming of hole features
  • 6.6 Contour feature milling programming
  • 7 Process control
  • 7.1 Process flow
  • 7.2 Process preparation
  • 7.3 Compiling CNC program
  • 7.4 Post-processing and processing simulation
  • 7.5 Preparation before skin milling
  • 7.6 Actual profile acquisition and program modification
  • 7.7 Skinning and milling
  • 7.8 Disassembling the skin
  • 8 Quality Control
  • Appendix B (informative appendix) Skin mirror image structure accuracy detection method

1 Scope

This standard specifies the general requirements for mirror milling of skin parts, feature definition and classification, programming methods, process flow, and quality control.

This standard applies to the mirror milling of metal skin parts for civil aircraft. Other products can be implemented by reference.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 4863 Basic terminology of mechanical manufacturing process

GB/T 6477 Metal cutting machine terminology

3 Terms and definitions

The terms and definitions defined in GB/T 4863 and GB/T 6477 and the following apply to this document.

3.1 Mirror milling

The position and posture of the milling tool and the position and posture of the back support device are approximately mirror images at the same time, and synchronized and coordinated movements are completed to complete the

Leather processing, as shown in Figure 1.

Figure 1 Schematic diagram of mirror milling

3.2 Jacking device holdersystem

Follow the mirror movement of the milling spindle head, and have the function of maintaining the rigidity of the processing area, and can monitor the skin processing in real time during the processing

The thickness of the device.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38929-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38929-2020

$240.00