Valid

GB/T 38825-2020Requirements of riveting connection in civil aircraft of composite parts (English PDF)

民用飞机复合材料制件铆接要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38825-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2020

Implementation date

January 1, 2021

Scope

GB/T 38825-2020 is the English-translated version of 民用飞机复合材料制件铆接要求.

GB/T 38825-2020 is the Chinese standard "Requirements of riveting connection in civil aircraft of composite parts". Its scope clause reads: This standard specifies the general requirements, process control and quality control for the riveting of composite parts.

This standard is applicable to solid rivet riveting and core-pulling rivet riveting of civil aircraft composite laminates. Its clauses include terms and definitions; general requirements.

Found what you need?

Document preview — GB/T 38825-2020

National Standard of the People's Republic of China

ICS
49.040
Classification
V 18

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 General requirements
  • 4.1 Personnel
  • 4.2 Environment
  • 4.3 Material
  • 4.4 Equipment and Tooling
  • 4.5 Security Protection
  • 5 Process control
  • 5.1 Riveting assembly flow chart
  • 5.2 Preparation before riveting
  • 5.3 Pre-production process testing
  • 5.4 Pre-assembly
  • 5.5 Determine the hole position
  • 5.6 Hole making
  • 5.7 Spot facing
  • 5.8 Cleaning up excess
  • 5.9 Reposition
  • 5.10 Stack thickness measurement
  • 5.11 Put nails
  • 5.12 Riveting
  • 6 Quality Control
  • 6.1 Quality of hole making
  • 6.2 The quality of the spot facing
  • 6.3 Quality of riveting

1 Scope

This standard specifies the general requirements, process control and quality control for the riveting of composite parts.

This standard is applicable to solid rivet riveting and core-pulling rivet riveting of civil aircraft composite laminates.

2 Normative references

The following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 116 rivet technical conditions

GB/T 6026 Industrial acetone

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Laminated mixedparts

Composite materials and composite materials, composite materials and metal materials are sandwiched and riveted to form components.

3.2 Wet installation

Install the sealant in the rivet hole, on the rivet rod and under the rivet head.

4 General requirements

4.1 Personnel

Composite material riveting and testing personnel should have composite material knowledge and professional grade certificates and be certified to work.

4.2 Environment

4.2.1

The riveting and assembly area of composite materials should be clean and bright. Generally, the temperature is 15°C~30°C, and the relative humidity is 40%~

80%, when the technical documents have provisions, they shall be implemented as required.

4.2.2

Dust generated from hole-making and grinding construction should be cleaned up and should not pollute the environment and the parts.

4.2.3

There should be good ventilation and dust removal facilities indoors.

4.3 Materials

4.3.1

Core-pulling rivets should be preferred to avoid impacts on composite parts and damage to the hole wall due to the thickening of the nail rod.

4.3.2

The diameter of the rivet should generally not exceed 4mm, otherwise it is not only difficult to form, but also easy to cause damage to the composite material parts. Meet the knot

Where required by the structure, flat or semi-round nail heads should be used as much as possible.

4.3.3

The selection of rivets and washers used for riveting of composite material parts should meet the requirements of engineering drawings, usually titanium alloy or stainless steel […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38825-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38825-2020

$225.00