Valid

GB/T 38876-2020Test method for access network equipment—10Gbit/s ethernet passive optical network (10G EPON) (English PDF)

接入网设备测试方法 10Gbit/s以太网无源光网络(10G EPON)

Preview PDF

This is a limited preview

Buy now to download the full PDF (43 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38876-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 21, 2020

Implementation date

February 1, 2021

Scope

GB/T 38876-2020 is the English-translated version of 接入网设备测试方法 10Gbit/s以太网无源光网络(10G EPON).

GB/T 38876-2020 is the Chinese standard "Test method for access network equipment—10Gbit/s ethernet passive optical network (10G EPON)".

Its scope clause reads: This standard specifies the requirements of 10Gbit/s Ethernet passive optical network (10GEPON) central office equipment (OLT) and user-side equipment (ONU) Test methods for interfaces, functions, performance, network management, etc. This standard applies to 10GEPON equipment in the public telecommunication network environment, and the private telecommunication network can also be used as a reference.

Found what you need?

Document preview — GB/T 38876-2020

National Standard of the People's Republic of China

ICS
33.040.50
Classification
M 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope1
  • 2 Normative references1
  • 3 Abbreviations2
  • 4 PON interface test3
  • 4.1 OLTPON interface parameter test3
  • 4.2 ONU's PON interface4
  • 5 ODN ability test6
  • 5.1 Maximum split ratio and maximum transmission distance6
  • 5.2 Maximum differential distance7
  • 6 10GEPON and 1GEPON coexist7
  • 6.1 Test purpose7
  • 6.2 Test configuration7
  • 6.3 Test Step8
  • 6.4 Expected results8
  • 7 Interface test8
  • 7.1 User side interface8
  • 7.2 Network side interface9
  • 8 PON basic function test9
  • 8.1 Automatic discovery and registration of ONU9
  • 8.2 DBA function10
  • 8.3 ONU power failure notification function12
  • 8.4 Optical link measurement and diagnosis13
  • 8.5 Detection and control of abnormal lighting ONU14
  • 8.6 FEC function14
  • 8.7 PON fiber protection switching15
  • 8.8 Service flow classification and priority marking17
  • 8.9 Service priority marking processing20
  • 8.10 Service flow rate limit21
  • 8.11 Business priority scheduling strategy23
  • 9 Ethernet/IP function test25
  • 9.1 Two-layer isolation25
  • 9.2 Flow control function26
  • 9.3 Rapid Spanning Tree Function (RSTP)27
  • 9.4 Link aggregation28
  • 9.5 Uplink port mirroring and redirection29
  • 9.6 Multicast function29
  • 9.7 User ring network detection35
  • 9.8 VoIP function36
  • 9.9 Safety requirements36
  • 9.10 Multicast/broadcast/unknown unicast message suppression38
  • 9.11 Limit on the number of MAC address learning38
  • 9.12 MAC address anti-spoofing function39
  • 9.13 VLAN function40
  • 9.14 VLANStacking function43
  • 9.15 DHCP Relay Agent Option 82 Function45
  • 9.16 DHCP Relay Agent Option 82 Control Function45
  • 9.17 IP address binding function46
  • 10 Performance test47
  • 10.1 Maximum logical transmission distance test47
  • 10.2 IP service performance47
  • 10.3 Multicast service performance49
  • 10.4 E1 business performance51
  • 10.5 VoIP voice service performance51
  • 10.6 Timing synchronization51
  • 10.7 Equipment stability test52
  • 11 Network management test53
  • 11.1 Man-machine interface and basic functions53
  • 11.2 Configuration Management54
  • 11.3 Performance Management54
  • 11.4 Fault and Alarm Management55
  • 11.5 Safety Management55
  • 12 other56
  • 12.1 Environmental testing56
  • 12.2 Power test56
  • 12.3 Electrical safety testing56

1 Scope

This standard specifies the requirements of 10Gbit/s Ethernet passive optical network (10GEPON) central office equipment (OLT) and user-side equipment (ONU)

Test methods for interfaces, functions, performance, network management, etc.

This standard applies to 10GEPON equipment in the public telecommunication network environment, and the private telecommunication network can also be used as a reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 7611-2016 Digital network series bit rate electrical interface characteristics

GB/T 17618-2015 Information Technology Equipment Immunity Limits and Measurement Methods

YD/T 751-1995 Digital telephone switching equipment used in public telephone network office enters the network detection method

YD/T 1098-2009 Router Equipment Test Method Edge Router

YD/T 1141-2007 Ethernet switch test method

YD/T 1156-2009 Router Equipment Test Method Core Router

YD/T 1240-2002 Access network equipment testing method Broadband access network equipment based on Ethernet technology

YD/T 1531-2006 Access network equipment test method based on Ethernet passive optical network (EPON)

YD/T 1532-2006 Test method of integrated access equipment based on softswitch

YD/T 1808-2008 The second generation of test method for access network equipment and the second generation of asymmetric digital subscriber line (AD-

SL2/2)

YD/T.1995-2009 Access network equipment test method Gigabit Passive Optical Network (GPON)

YD/T 2274-2011 Access Network Technical Requirements 10Gbit/s Ethernet Passive Optical Network (10G-EPON)

YD/T 2277-2011 Access Network Technical Requirements Passive Optical Network (PON) Optical Link Monitoring and Diagnosis

YD/T 2278-2011 Access Network Equipment Test Method The Second Generation Very High Speed Digital Subscriber Line (VDSL2)

IEEE802.1ad LAN and Metropolitan Area Network IEEE Standard Virtual Bridge LAN Supplement 4.Service Provider Bridge (IEEEStandardforLocalandmetropolitanareanetworks-VirtualBridgedLocalAreaNetworks-

Amendment4.ProviderBridges)

IEEE802.1D IEEE standard media access control (MAC) bridge for local area networks and metropolitan area networks [IEEEStandardforLocal andmetropolitanareanetworks-MediaAccessControl(MAC)Bridges]

IEEE802.1Q LAN and Metropolitan Area Network IEEE Standard Virtual Bridged LAN (IEEEStandardforLocaland metropolitanareanetworks-VirtualBridgedLocalAreaNetworks)

IEEE802.3 Communication and information exchange between information technology systems. Specific requirements for local area networks and metropolitan area networks. Part 3.CS-

MA/CD access method and physical layer specification [Informationtechnology-Telecommunicationsandinformation exchangebetweensystems-Localandmetropolitanareanetworks-Specificrequirements-Part 3.

CarrierSenseMultipleAccesswithColisionDetection(CSMA/CD)accessmethodandphysicalayer specifications] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 43 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38876-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
43 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38876-2020

$680.00