Valid

GB/T 38799-2020Technical requirement for security of broadband customer network equipment based on public telecommunication network—Broadband customer gateway (English PDF)

基于公用电信网的宽带客户网络设备安全技术要求 宽带客户网关

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38799-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38799-2020 is the English-translated version of 基于公用电信网的宽带客户网络设备安全技术要求 宽带客户网关.

GB/T 38799-2020 is the Chinese standard "Technical requirement for security of broadband customer network equipment based on public telecommunication network—Broadband customer gateway".

Its scope clause reads: This standard specifies the user plane security requirements and control level of broadband customer gateway equipment in broadband customer networks based on public telecommunication networks.

Surface safety requirements, management plane safety requirements, equipment reliability and electrical safety requirements. This standard applies to gateways in broadband customer networks based on public telecommunication networks.

Its clauses include abbreviations; user plane security requirements; control plane security requirements; management plane security requirements; reliability requirements; electrical safety requirements.

Found what you need?

Document preview — GB/T 38799-2020

National Standard of the People's Republic of China

ICS
33.040.50
Classification
M 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 4 User plane security requirements
  • 4.1 Security management function
  • 4.2 Access Control List
  • 4.3 VPN function
  • 4.4 NAT function
  • 4.5 Firewall function
  • 4.6 Anti-attack function
  • 4.7 Security of network access
  • 4.8 WLAN Security
  • 5 Control plane security requirements
  • 5.1 PPP user authentication
  • 5.2 Log function
  • 6 Management plane security requirements
  • 6.1 Telnet access
  • 6.2 Web Management
  • 6.3 Connection authentication function
  • 7 Reliability requirements
  • 8 Electrical safety requirements

1 Scope

This standard specifies the user plane security requirements and control level of broadband customer gateway equipment in broadband customer networks based on public telecommunication networks.

Surface safety requirements, management plane safety requirements, equipment reliability and electrical safety requirements.

This standard applies to gateways in broadband customer networks based on public telecommunication networks.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

YD/T 965 Safety requirements and test methods for telecommunication terminal equipment

IETFRFC1918 Internet private address allocation (Addressalocationforprivateinternets)

3 Abbreviations

4 User plane security requirements

4.1 Safety management function

4.1.1 Password management

The password involved in the broadband customer gateway should be no less than 8 characters in length, and should be composed of numbers, letters or special symbols.

The gateway can provide a check mechanism to ensure that each password is composed of at least two of the aforementioned three types of symbols.

4.1.2 User Management

The gateway should have ordinary users and administrator users.

Ordinary user management authority can configure and query some non-important parameters of the gateway, but cannot perform important parameters of the gateway.

Configuration.

The administrator can configure and query important parameters of the gateway for local maintenance and management authority.

4.2 Access Control List

The access control list that should be implemented.

Should support based on the source MAC address, source IP address, destination IP address, Ethernet protocol type, TCP/UDP source port number, TCP/

Access control list of UDP destination port number, TOS domain, and IP protocol type.

4.3 VPN function

4.3.1 L2TP tunnel

Should support to realize VPN through L2TP tunnel technology, should support LAC and LNS function, support CHAP authentication protocol.

4.3.2 IPSec tunnel (optional)

Optional support to realize VPN through IPSec tunnel technology.

4.3.3 MPLSVPN (optional)
4.3.3.1 General requirements

Whether it is L2VPN or L3VPN, data should be forwarded along the LSP strictly based on labels. Unless needed, a VPN data

It should not be sent outside the VPN, and data from one VPN should not enter another VPN.

When supporting VPN services and Internet services at the same time, especially when supporting different logical interfaces on the same physical interface

For VPN services and Internet services, the access rate can be limited based on logical interfaces.

4.3.3.2 L2VPN

The MAC address and VLAN information between VPNs should be isolated from each other, and between VPNs or between VPN and MPLS backbone should be able to

Multiplexing MAC address space and VLAN space. Unless necessary, the exchange of information between VPNs or between VPNs and MPLS backbones

Isolated from each other.

4.3.3.3 L3VPN

The commonly used L3VPN technology is BGP/MPLSVPN. BGP/MPLSVPN essentially restricts routing through the BGP protocol

The requirements of MPLS for information distribution on L3VPN are as follows.

---Should support static routing algorithms and dynamic routing algorithms. For dynamic routing algorithms, it should have the ability to filter routing updates on the interface.

Both IGP and EGP routing protocols should support MD5 encryption authentication, and can limit the routing update speed based on the VRF instance.

---The topology and addressing information between VPNs should be isolated from each other, and a VPN should be able to use all Internet address ranges, including

The private address range defined by IETFRFC1918, IP should be reused between VPNs or between VPN and MPLS backbone

Address space.

---A separate VRF instance should be maintained for each VPN, unless required, between VPNs or between VPNs and MPLS backbone

The routing information and its distribution and processing should be independent of each other and not interfere with each other.

4.4 NAT function

The broadband customer gateway should support the NAT function, and the functional characteristics of NAT are as follows.

--- should support NAPT;

---Should support HTTP, FTP, DNS, H.323, SIP and other application protocols;

---It should support output NAT log records.

4.5 Firewall function

Broadband customer gateways should support firewall functions. In addition to packet filtering, access control lists, and NAT, they should support application proxy functions.

Allow protected networks to access allowed network applications.

Supports firewall high, middle and low level settings, and the content of each security level can be modified.

Optional support to configure the level of the firewall on the local Web interface, divided into three levels. high, medium and low.

State detection not only checks the information of the network layer and the transport layer, but also checks the information of the application layer protocol, and maintains these TCP or UDP in real time

Status information. Using these status information to determine access control should support packet filtering based on status detection.

4.6 Anti-attack function

4.6.1 Anti-DoS attack function

The broadband customer gateway should support the prevention of DoS attacks such as PingofDeath and SYNFlood, and it is recommended that the gateway be able to prevent the

The application protocol (for example, DNS) to attack.

4.6.2 Anti-port scanning capability

Broadband customer gateways should be able to provide anti-port scanning functions and support the prevention of malicious port scanning by other devices or applications.

4.6.3 Function to limit the number of MAC addresses learned per port

The broadband customer gateway should be configured to limit the number of source MAC addresses learned from each user's LAN port.

4.6.4 Illegal multicast source control function

Broadband customer gateways should support multicast that prevents users from being the source, and can be configured to prohibit IGMPQuery and multicast data from user ports

According to the message.

4.6.5 Message suppression

The broadband customer gateway should be able to suppress the rate of broadcast/multicast packets of specific protocols (for example, DHCP, ARP, ICMP, IGMP, etc.)

It can limit the rate of other Layer 2 broadcast messages.

4.7 Security of network access

The broadband customer gateway shall support the DMZ function.

Broadband customer gateways should support access control based on MAC addresses and IP addresses (including LAN and WLAN).

Broadband customer gateways should support the setting of black and white lists to implement URL access control functions. The black and white list should support the

PPPoE account binding.

The broadband customer gateway should support online time management based on the PPPoE account initiated by the gateway.

4.8 WLAN security

Broadband customer gateways should support the configuration of different SSIDs to distinguish networks, enable or disable the SSID broadcast function, and support the hidden SSID The function of hiding. Should also support its WLAN wireless signal transmission power and working channel settings. Should support the WLAN client

Authentication and encryption of data sent and received by WLAN.

5 Control plane security requirements

5.1 PPP user authentication

As a data link layer protocol, PPP does not have perfect security capabilities. Should support PAP mode user access authentication. in

When accessing through PPPoE, user authentication can be done through PAP method.

Should support CHAP mode user access authentication. When accessing through PPPoE, users can be accessed through CHAP Certification.

Should support user access authentication based on operator information. During the dialing process, the gateway extracts the operator information from the

Based on this information, it is determined whether to proceed with the subsequent dialing process.

Optional proxy that supports user access authentication based on PPPoE user account. That is, the broadband customer gateway receives the inclusion of the user terminal

After the PPPoE Internet request of the user name and password, the gateway terminates the PPPoE request, and then uses the intercepted user name and password to initiate to the network side

Link request. The broadband customer gateway assigns an internal network address to the user terminal to allow the user terminal to access the network. If broadband customers

When the gateway receives a new user terminal using the username and password to dial, the gateway directly allocates the internal network address for the user terminal, and no longer

The network side initiates a new connection and directly uses the existing connection to go online. When there are multiple network-side PPPoE connections with different accounts, the corresponding

The connection of the user-side account should only be bound to the network-side connection of the corresponding account.

5.2 Log function

To provide logging function for control plane information, the gateway should have an independent firewall log, which records the network

The network behavior that violates the firewall rules in the broadband customer network detected by the device, each record should be time stamped. The firewall log should

Can contain at least 100 records. If the number of logs generated exceeds the capacity, it is advisable to keep the latest record and cover the earliest record.

Way of recording.

The firewall log should not be modified. The log should not be deleted, unless reset to the factory/default configuration.

The log should record related security events such as filtering rules, denial of access, configuration modification, etc. The requirements for logs include.

--- Each security log entry should include the subject of the event, the time of occurrence, and the description of the event;

---It should be able to be stored in the cache area of the local system or sent to a dedicated log host for further processing;

---Optional real-time printing on a dedicated printer or display terminal connected to the device;

---The severity level of the log should be defined, and the output can be filtered according to the severity level;

---Should support the interface with the log host.

6 Management plane security requirements

6.1 Telnet access

The Telnet protocol is used for remote login through network devices. If Telnet service is provided to users, it is recommended to meet the following

Provisions.

---The user should provide the username/password for subsequent operations, and the user address and operation should be included in the log;

---The number of users who can access at the same time should be limited;

---If there is no interaction within the set time, the user should be automatically logged out;

---You can limit which IP addresses the user can use to access the device using Telnet services;

---Telnet service can be turned off if necessary.

6.2 Web management

Web management is based on the HTTP protocol, and the broadband customer gateway should support Web management and should meet the following conventions.

---The user should provide the user name/password for subsequent operations, and the user address and operation should be recorded in the log;

---You can limit which IP addresses the user uses to access the device using HTTP;

---You can turn off the HTTP service if necessary;

---Should support SSL/T LS.

6.3 Connection authentication function

The gateway should have certain security measures to ensure the security of RMS's remote management and control of the gateway, and avoid illegal configuration of the gateway.

Set. At the same time, the gateway should have a certain security mechanism, such as remote network management should support connection authentication, support modification of management authentication account, system date

Logs and security logs, security mechanisms for management information transmission, etc., to ensure the security of remote management.

7 Reliability requirements

Broadband customer gateway should realize automatic rollback after software upgrade fails, key configuration is not lost, remote diagnosis and remote restart, etc.

Features.

8 Electrical safety requirements

The broadband customer gateway should meet the electrical safety requirements in YD/T 965.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38799-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38799-2020

$150.00