Valid

GB/T 38644-2020Information security technology—Trusted computing—Testing method of trusted connect (English PDF)

信息安全技术 可信计算 可信连接测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38644-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38644-2020 is the English-translated version of 信息安全技术 可信计算 可信连接测试方法.

GB/T 38644-2020 is the Chinese standard "Information security technology—Trusted computing—Testing method of trusted connect".

Its scope clause reads: According to GB/T 29828-2013, this standard specifies the test requirements for trusted network connection protocols and the cryptographic algorithms involved and Methods, including the following. a) Requirements and methods for compliance testing of protocol interaction mechanisms involved in the trusted network connection protocol; b) Requirements and methods for correctness testing of cryptographic algorithms involved in the trusted network connection protocol.

This standard is applicable to the testing of trusted connected devices in accordance with GB/T 29828-2013, used to detect its cryptographic algorithm and based on trust Whether the implementation of TCA's trusted network connection protocol meets the requirements. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38644-2020

National Standard of the People's Republic of China

ICS
35.040
Classification
L 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction IV
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Acronyms
  • 5 General requirements
  • 5.1 Compliance and interoperability requirements of protocol interaction mechanism
  • 5.2 The correctness requirements of cryptographic algorithm implementation
  • 6 Overview of test methods
  • 6.1 Test equipment
  • 6.2 Test topology
  • 6.3 Test basis
  • 6.4 Test instructions
  • 7 Protocol interaction mechanism compliance and interoperability testing methods
  • 7.1 Port access control test
  • 7.2 TAEP protocol packaging test
  • 7.3 TAEPoL protocol packaging test
  • 7.4 TCP/UDP port test
  • 7.5 Trusted connection architecture test
  • 8 The correctness test method of cryptographic algorithm implementation
  • 8.1 Symmetric cryptographic algorithm test
  • 8.2 Digital signature algorithm test
  • 8.3 Key exchange protocol testing
  • 8.4 Public key encryption algorithm test
  • 8.5 Digital certificate format test
  • 8.6 Password hashing algorithm test
  • 8.7 Random number test
  • 8.8 Algorithm performance test
  • Appendix A (Normative Appendix) New data elements involved in trusted connection architecture testing
  • Appendix B (Normative Appendix) Cryptographic Algorithm Performance Test Method and New Data Elements

1 Scope

According to GB/T 29828-2013, this standard specifies the test requirements for trusted network connection protocols and the cryptographic algorithms involved and

Methods, including the following.

a) Requirements and methods for compliance testing of protocol interaction mechanisms involved in the trusted network connection protocol;

b) Requirements and methods for correctness testing of cryptographic algorithms involved in the trusted network connection protocol.

This standard is applicable to the testing of trusted connected devices in accordance with GB/T 29828-2013, used to detect its cryptographic algorithm and based on trust

Whether the implementation of TCA's trusted network connection protocol meets the requirements.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 15843.3 Information technology security technology entity authentication Part 3. Mechanism using digital signature technology

GB/T 20518 Information Security Technology Public Key Infrastructure Digital Certificate Format

GB/T 28455-2012 Information security technology introduces trusted third-party entity authentication and access architecture specifications

GB/T 29828-2013 Information Security Technology Trusted Computing Specification Trusted Connection Architecture

GB/T 32905 information security technology SM3 password hash algorithm

GB/T 32907 Information Security Technology SM4 Block Cipher Algorithm

GB/T 32915 Information Security Technology Binary Sequence Randomness Detection Method

GB/T 32918 (all parts) Information security technology SM2 elliptic curve public key cryptographic algorithm

GB/T 35276 Information Security Technology SM2 Cryptographic Algorithm Usage Specification

GM/T 0042-2015 ternary peer-to-peer password security protocol test specification

GM/T 0062-2018 Password product random number detection requirements

3 Terms and definitions

The terms and definitions defined in GB/T 29828-2013 and the following apply to this document. For ease of use, the following list is repeated

Some terms and definitions in GB/T 29828-2013.

3.1 Testedequipment

The test object of the trusted network connection protocol is realized.

3.2 Test platform

Test the trusted network connection protocol, with the ability to test the trusted network connection protocol and the cryptographic algorithms involved, collect and analyze

The platform analyzes and processes the test data, judges the test data according to the requirements of the test specifications, and presents and records the judgment results.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38644-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38644-2020

$360.00