GB/T 38627-2020Information technology—Real-time positioning—Magnetic positioning data interface (English PDF)
信息技术 实时定位 磁定位数据接口
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38627-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 28, 2020
Implementation date
November 1, 2020
Scope
GB/T 38627-2020 is the English-translated version of 信息技术 实时定位 磁定位数据接口.
GB/T 38627-2020 is the Chinese standard "Information technology—Real-time positioning—Magnetic positioning data interface". Its scope clause reads: This standard specifies the interface and parameter definitions between the positioning client and the positioning server in the magnetic positioning system.
This standard applies to the design, development and application of positioning client and positioning server systems that use magnetic data for real-time positioning.
Its clauses include terms and definitions; abbreviations; system interface relationship.
Found what you need?
Document preview — GB/T 38627-2020
National Standard of the People's Republic of China
- ICS
- 35.110
- Classification
- L 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Abbreviations
- 4 System interface relationship
- 5 Positioning interface
- 6 Parameter definition
- 6.1 Sensor parameter definition
- 6.2 Definition of positioning result parameters
- Appendix A (informative appendix) Magnetic positioning data interface XML mode
- Appendix B (informative appendix) Some high-order magnetic characteristics calculation formula
1 Scope
This standard specifies the interface and parameter definitions between the positioning client and the positioning server in the magnetic positioning system.
This standard applies to the design, development and application of positioning client and positioning server systems that use magnetic data for real-time positioning.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Intelligent Terminal
With embedded software and hardware systems, terminal products for the personal consumer market.
2.2
The terrestrial magnetic field and the distortion of electronic equipment and ferromagnetic materials are superimposed on the terrestrial magnetic field.
2.3 Magnetic positioning
Use magnetic field characteristics to achieve positioning.
2.4 Positioning engine
Software or components that calculate the real-time location of the terminal.
2.5 Locate the client
The software or component that initiates the positioning request.
2.6 Location server
Software or components that calculate the real-time location of the terminal.
2.7 Sampling frequency
The number of times the device collects data per second.
2.8 Data preprocessing
Perform data filtering and smoothing on the sampling results.
2.9 Location request
Request the latest location information from the server.
2.10 Positioning result
The location information returned by the server to the client.
2.11 Circular probability error
With the true position as the center of the circle, the dispersion radius of the two-site position with a probability of 50% deviation from the center of the circle.
2.12 positioning accuracy
The standard deviation between the positioning result and the true position.
2.13 XML markup
Identifier of legal content in XML document.
[GB/T 30996.1-2014, definition 3.5]
2.14 Magnetometer
Sensors that can measure magnetic fields.
Note. The most common application of magnetometers in personal electronic devices is the electronic compass, which uses the earth's magnetic field as a reference to determine the direction/heading of the device.
3 Abbreviations
The following abbreviations apply to this document.
4 System interface relationship
The magnetic positioning system includes a positioning client and a positioning server. The system interface relationship is shown in Figure 1.The positioning client is performing data collection and
After data preprocessing and formatting operations, a positioning request is initiated to the positioning server, and the positioning result is obtained through the magnetic positioning engine and used to return
The location information realizes the corresponding application function. The location server uses environmental magnetic field data to calculate and return to location based on different location algorithms
Client location information. The positioning server can be deployed locally (such as a smart terminal) or a remote network, and the client can transmit the fixed position through the network interface.
Bit request or positioning result.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38627-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38627-2020
$210.00