GB/T 38567-2020General specification for data interchange in port logistics operation (English PDF)
港口物流作业数据交换通用技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38567-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 31, 2020
Implementation date
October 1, 2020
Scope
GB/T 38567-2020 is the English-translated version of 港口物流作业数据交换通用技术规范.
GB/T 38567-2020 is the Chinese standard "General specification for data interchange in port logistics operation". Its scope clause reads: This standard specifies data exchange types, data exchange principles, basic data exchange requirements, data exchange rules, data exchange According to the exchange process.
This standard applies to data exchange between relevant units of port logistics. Its clauses include terms and definitions; types of data exchange; basic requirements for data exchange; data exchange rules; data exchange process.
Found what you need?
Document preview — GB/T 38567-2020
National Standard of the People's Republic of China
- ICS
- 35.240.60
- Classification
- R 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Data exchange type
- 4 Principles of data exchange
- 5 Basic requirements for data exchange
- 6 Data Exchange Rules
- 7 Data exchange process
1 Scope
This standard specifies data exchange types, data exchange principles, basic data exchange requirements, data exchange rules, data exchange
According to the exchange process.
This standard applies to data exchange between relevant units of port logistics.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Data
A formal representation of facts, concepts or instructions, suitable for manual or automated communication, interpretation or processing.
[GB/T 18391.1-2009, definition 3.12]
2.2 Message
The data unit of data exchange and transmission is the data block sent at one time.
2.3 Electronic data interchange electronicdatainterchange;EDI
According to the agreement or regulations, for standard information with certain structural characteristics, through the data communication network, in the respective electronic computer system
Exchange and process between.
3 Types of data exchange
Port logistics operation data exchange uses electronic messages as the data carrier. The types and main electronic messages are shown in Table 1.
---According to the agreement, the receiver should send the electronic message of the return receipt to the sender.
5 Basic requirements for data exchange
5.1 Transmission requirements
5.1.1 Compatibility
It should be compatible with multiple file formats, including XML files, platform files, EDIFACT files and binary files, and be Base64 compiled
After the code is converted, it is transmitted in a text file format.
It should be compatible with multiple transmission protocols, including FTP, MQ, AS2, and EMAIL related protocols, and support protocol extensions.
5.1.2 Stability and reliability
Corresponding services should be provided in accordance with the specific requirements of the application project operation guarantee carried by the switching node.
The retransmission mechanism should also provide processing mechanisms such as message queue storage, transaction control, hot standby, and error handling.
5.1.3 Timeliness of transmission
For time-sensitive data, the timely delivery of the data should be ensured.
5.1.4 Correctness
It should be ensured that the content of the data will not change during the exchange.
5.1.5 Security
Encryption and endorsement techniques should be used to ensure that data is not tampered with during storage, transmission, and processing.
5.1.6 Transmission uniqueness
It should be ensured that data is only effectively transmitted once.
5.2 Format requirements
5.2.1
The character encoding of electronic messages should be UTF-8.
5.2.2
If electronic messages need to be compressed, they should be compressed using ZIP algorithm for transmission. The naming rules for compressed files should be consistent with the original messages.
5.2.3
In the definition of the data exchange message, the content of the numeric field should adhere to the principle of actual value.
6 Data Exchange Rules
6.1
The transportation plan and implementation information messages are delivered by the shipping company (carrier) or its shipping agent to the container terminal, tally, freight forwarder or
Its owner.
6.2
Calling information messages are delivered by the shipping company (carrier) or its shipping agent to port dispatch, wharf, pilotage, customs, and maritime affairs.
6.3
Ship departure messages are transmitted by the container terminal to the tally, shipping company (carrier) or its shipping agent. At the same time pass it to the customs and maritime affairs.
6.4
Manifest (import) messages are delivered by the shipping company (carrier) or its shipping agent to port dispatch, container terminal, and tally. Simultaneous delivery
To customs and maritime affairs; manifest (export) messages are delivered to customs, tally, and container terminals by shipping companies (carriers) or their shipping agents.
6.5
Ship chart (import) messages are transmitted by the shipping company (carrier) or its ship agent to port dispatch, container terminal, and tally; ship chart (export)
The message is passed by the tally to the shipping company (carrier) or its shipping agent.
6.6
Dangerous goods notification messages are delivered by the shipping company (carrier) or its shipping agent to port dispatch, maritime affairs, container terminals, tally, and cargo owners
Or its freight forwarder.
6.7
The dangerous goods list message is transmitted by the shipping company (carrier) or its shipping agent to port dispatch, container terminal, tally, and maritime affairs.
6.8
Shipment instruction messages are delivered by the shipping company (carrier) or its shipping agent to port dispatch, container terminal, tally, and customs.
6.9
The container loading/unloading report message is transmitted by the tally to the shipping company (carrier) or its shipping agent, port dispatcher, and container terminal.
6.10
The container overflow, short, and damaged messages are transmitted by the tally to the shipping company (carrier) or its shipping agent, container terminal, customs, and insurance.
6.11
The packing instruction message is transmitted by the owner or its freight agent to the customs, shipping company (carrier) or its shipping agent, container terminal, management
Cargo, yard, transportation agency.
6.12
The packing list message is transmitted by the container freight station, freight forwarder, and station to the container terminal, cargo owner, tally, shipping company (carrier) or
Its shipping agency and customs.
6.13
The container storage report message is transmitted by the container terminal and station to the shipping company (carrier) or its shipping agent, port dispatcher, and customs.
6.14
The container entry/exit report message is transmitted by the container terminal and station to the shipping company (carrier) or its shipping agent, inland transshipment
Heart, shipper, freight forwarder.
6.15
Make sure that the booking message is delivered by the cargo owner or its freight forwarder to the shipping company (carrier) or its shipping agent.
6.16
The booking acceptance message is transmitted by the shipping company (carrier) or its shipping agent to the owner or its freight forwarder.
6.17
The total container weight message is transmitted by the cargo owner or freight forwarder to the port, shipping company (carrier) or its shipping agent.
6.18
The bill of lading message should be delivered to the owner or freight forwarder by the shipping company (carrier) or its shipping agent.
6.19
The equipment handover order message is transmitted by the container management unit to the container user/container, container terminal, and station.
6.20
The bulk cargo warehousing message is transmitted by the bulk cargo terminal to the customs, freight forwarders or their owners.
6.21
Bulk cargo shipping messages are transmitted by the bulk cargo terminal to the customs, freight forwarders or their owners.
6.22
The operation plan message is passed to the customs by the bulk terminal.
6.23
The road cargo waybill message is transmitted by the road transport carrier to the transport shipper, freight forwarder or its owner, wharf, and inland terminal.
6.24
(Train) Monthly plan application message is passed to the railway department by the cargo owner or freight forwarder.
6.25
(Train) Daily plan application messages are passed to the railway department by the cargo owner or freight forwarder.
6.26
(Train) Monthly plan application approval message is transmitted by the railway department to the freight forwarder or its owner.
6.27
(Train) Daily plan application approval message is transmitted by the railway department to the freight forwarder or its owner.
6.28
The consignment message for container loading of trains is transmitted to the railway department by the cargo owner or freight forwarder.
6.29
The railway waybill message is transmitted by the railway transport carrier to the freight forwarder or its owner, wharf, or inland station.
6.30
The train departure report message is transmitted from the train departure station to the cargo destination station, shipping agency and terminal.
6.31
The train arrival report message is transmitted from the train departure station to the cargo destination station, freight forwarder, tally and terminal.
6.32
The train in transit information message is passed by the railway department to the freight forwarder or its owner.
6.33
The messages of loading and unloading trucks are transmitted to freight forwarders or their cargo owners by wharves and railway ports.
6.34
The electronic messages of railway delivery and marshalling are transmitted by the railway department to the wharf, MTR, and railway port station.
6.35
(Railway container) The stop-loading message is transmitted by the railway department to the transport shipper, freight forwarder or its owner, wharf, inland station.
6.36
Arrival messages are passed to the customs by the operator of the customs supervision site.
6.37
The message of the customs declaration form is delivered to the customs by the owner or its freight forwarder or customs broker.
6.38
Customs inspection and processing instruction messages are transmitted by the customs to the owner or its freight forwarder, tally, container terminal, and inspection yard.
6.39
The customs release instruction message is passed by the customs to the freight forwarder or its owner, tally, container terminal, and inspection yard.
6.40
The inspection and handling of container shifting feedback messages are passed to the customs by the container terminal and inspection yard.
6.41
Check and release the entry/exit feedback message from the container terminal to the customs.
6.42
Inspect and release loading/unloading feedback messages from the container terminal to the customs.
6.43
The customs transfer and seal inspection messages are passed by the customs to the container terminal, inspection yard, and tally.
6.44
The distribution order message is passed by the customs to the container terminal, inspection yard, and tally.
6.45
International transshipment entry and exit declaration messages are passed to the customs by the container terminal.
6.46
The customs acknowledgement message for international transshipment is passed by the customs to the container terminal and tally.
6.47
The transfer message is transmitted to the customs by the container terminal and inspection yard.
6.48
The message of the general declaration form is passed to the customs, maritime affairs and border inspection by the shipping company (carrier) or its shipping agent.
6.49
The cargo declaration message is delivered to the customs and maritime affairs by the shipping company (carrier) or its shipping agent.
6.50
The passenger list message is passed to the customs, maritime affairs and border inspection by the shipping company (carrier) or its shipping agent.
6.51
The crew list messages are passed to the customs, maritime affairs and border inspection by the shipping company (carrier) or its shipping agent.
6.52
The shipping company (carrier) or its shipping agent transmits the message of the marine goods declaration form to the customs and maritime affairs.
6.53
The message of the crew item declaration form is passed to the customs, maritime affairs and border inspection by the shipping company (carrier) or its shipping agent.
7 Data exchange process
7.1 Import operations
7.1.1
The shipping company (carrier) or its shipping agent passes the EDI center to transfer transportation to the container terminal, tally, freight forwarder or its owner
Plan and implement information messages.
7.1.2
The shipping company (carrier) or its shipping agent passes the EDI center to the port dispatch, wharf, pilotage, customs, and maritime affairs to deliver the call information
Message.
7.1.3
The shipping company (carrier) or its shipping agent passes the EDI center to transfer manifest messages to port dispatch, container terminals, and tally.
7.1.4
The shipping company (carrier) or its shipping agent passes through the EDI center to deliver ship plans (imports) to port dispatch, container terminals, and tally.
Message.
7.1.5
The shipping company (carrier) or its shipping agent, through the EDI center, provides dispatch, maritime, container terminals, tally, cargo owners or their cargo
The forwarding agent transmits the dangerous goods notification message.
7.1.6
Shipping companies (carriers) or their shipping agents pass through the EDI center to deliver dangerous goods to port dispatch, container terminals, external management, and maritime affairs
List message.
7.1.7
Tally passes through the EDI center to deliver container loading/unloading to shipping companies (carriers) or their shipping agents, port dispatchers, and container terminals
Report message.
7.1.8
Tally passes through the EDI center to transfer container overflows and shortfalls to the shipping company (carrier) or its shipping agent, container terminal, customs, and insurance
Damaged messages.
7.1.9
Container terminals and stations pass through the EDI center to deliver containers to shipping companies (carriers) or their shipping agents, port dispatchers, and customs
Stack report message.
7.1.10
Through the EDI center, container terminals and depots provide shipping companies (carriers) or their shipping agents, inland transshipment centers, shippers, cargo
The forwarding agent transmits the container in/out report message.
7.1.11
The shipping company (carrier) or its shipping agent passes the EDI center to deliver the bill of lading to the owner or freight forwarder.
7.1.12
The road transport carrier transmits the road cargo waybill message to the transport shipper, shipper, terminal, and inland station through the EDI center.
7.1.13
The bulk cargo terminal passes the EDI center to deliver bulk cargo storage messages to the customs and cargo owners.
7.1.14
The bulk cargo terminal passes the EDI center to deliver bulk cargo shipment messages to customs and cargo owners.
7.1.15
The bulk cargo terminal passes through the EDI center to deliver the operation plan message to the customs.
7.1.16
The cargo owner or freight forwarder passes the EDI center to the railway department to transmit (train) monthly plan application messages.
7.1.17
The cargo owner or freight forwarder passes the EDI center to the railway department to transmit (train) daily plan application messages.
7.1.18
The railway department passes the EDI center to the freight forwarder or its cargo owner to deliver the (train) monthly plan application approval message.
7.1.19
The railway department passes the EDI center to the freight forwarder or its cargo owner to deliver the (train) daily plan application approval message.
7.1.20
The cargo owner or freight forwarder passes the EDI center to the railway department to transfer the container loading message to the railway department.
7.1.21
The railway transport carrier passes through the EDI center to transmit the railway waybill message to the transport shipper, cargo owner, terminal, and inland station.
7.1.22
The train departure station passes the EDI center to deliver the train departure report message to the cargo destination station, shipping agency, and terminal.
7.1.23
The train departure station passes the EDI center to deliver the train arrival report message to the cargo destination station, freight forwarder, tally and terminal.
7.1.24
Through the EDI center, the railway department transmits train information messages to the freight forwarder or its cargo owner.
7.1.25
Wharf and railway port station pass EDI center to deliver loading and unloading messages to freight forwarders or their cargo owners.
7.1.26
Through the EDI center, the railway department transmits electronic messages of railway train delivery and marshalling to wharf, MTR, and railway port stations.
7.1.27
Through the EDI center, the railway department delivers (railway containers) to transport shippers, freight forwarders or their cargo owners, wharfs, and inland stations.
Stop loading messages.
7.1.28
The operator of the customs-supervised place passes the EDI center to deliver the arrival message to the customs.
7.1.29
The freight forwarder, its owner, and the customs broker pass the EDI center to pass the declaration message to the customs.
7.1.30
Through the EDI center, the customs transfers customs inspection and handling instructions to the owner or its freight forwarder, tally, container terminal, and inspection yard.
Order message.
7.1.31
Through the EDI center, the customs transmits customs clearance instructions to the freight forwarder or its owner, tally, container terminal, and inspection yard
Message.
7.1.32
The container terminal and the inspection yard pass the EDI center to pass the inspection and processing feedback messages to the customs.
7.1.33
The container terminal passes the EDI center to pass the inspection and release entry/exit feedback message to the customs.
7.1.34
The container terminal passes the EDI center to pass the inspection and release loading/unloading feedback message to the customs.
7.1.35
The customs passes through the EDI center to deliver the transit inspection messages to the container terminal, inspection yard, and tally.
7.1.36
Through the EDI center, the customs transfers distribution order messages to container terminals, inspection yards, and tally.
7.1.37
The container terminal passes the EDI center to pass the declaration of international transshipment entry and exit to the customs.
7.1.38
Through the EDI center, the customs transfers the customs acknowledgement message of international transshipment to the container terminal, inspection yard and tally.
7.1.39
The container terminal and inspection yard pass the EDI center and pass the transfer message to the customs.
7.1.40
The shipping company (carrier) or its shipping agent passes the EDI center to pass the general declaration message to the customs, maritime affairs and border inspection.
7.1.41
The shipping company (carrier) or its shipping agent passes the EDI center to the customs and maritime affairs to deliver the cargo declaration message.
7.1.42
The shipping company (carrier) or its shipping agent passes the EDI center to pass the passenger list message to the customs, maritime affairs and border inspection.
7.1.43
The shipping company (carrier) or its shipping agent passes the EDI center to pass the crew list message to the customs, maritime and border inspection.
7.1.44
The shipping company (carrier) or its shipping agent passes the EDI center to the customs and maritime affairs to deliver the ship's goods declaration message.
7.1.45
The shipping company (carrier) or its shipping agent passes the EDI center to pass the crew’s item declaration message to the customs, maritime and border inspections.
7.2 Export operations
7.2.1
The container terminal passes through the EDI center to forward the departure of the ship to the tally, shipping company (carrier) or its shipping agent, customs, and maritime affairs
Message.
7.2.2
The shipping company (carrier) or its shipping agent passes the EDI center to deliver manifest (export) messages to customs, tally, and container terminals.
7.2.3
Tally passes through the EDI center to deliver ship chart (export) messages to the shipping company (carrier) or its shipping agent.
7.2.4
The shipping company (carrier) or its shipping agent, through the EDI center, provides dispatch, maritime, container terminals, tally, cargo owners or their cargo
The forwarding agent transmits the dangerous goods notification message.
7.2.5
The tally passes through the EDI center to transmit danger to the shipping company (carrier) or its shipping agent, port dispatch, container terminal, customs, and maritime affairs.
Dangerous goods (export) list message.
7.2.6
The shipping company (carrier) or its shipping agent passes the EDI center to transfer the shipping instructions to the port dispatch, container terminal, tally, and customs.
Show message.
7.2.7
Tally passes through the EDI center to deliver container loading/unloading to shipping companies (carriers) or their shipping agents, port dispatchers, and container terminals
Report message.
7.2.8
The tally passes through the EDI center to transfer container overflow and shortfalls to the shipping company (carrier) or its shipping agent, container terminal, customs, and insurance
Damaged messages.
7.2.9
Container terminals and stations pass through the EDI center to deliver containers to shipping companies (carriers) or their shipping agents, port dispatchers, and customs
Stack report message.
7.2.10
Through the EDI center, container terminals and depots provide shipping companies (carriers) or their shipping agents, inland transshipment centers, shippers, cargo
The forwarding agent transmits the container in/out report message.
7.2.11
The cargo owner or freight forwarder transmits the total container weight message to the port, shipping company (carrier) or its shipping agent through the EDI center.
7.2.12
The container management unit passes the EDI center to transfer the equipment handover order message to the container user/container, container terminal, and station.
7.2.13
The road transport carrier transmits the road cargo waybill messages to the transport shipper, shipper, terminal, and inland station through the EDI center.
7.2.14
The bulk cargo terminal passes the EDI center to deliver bulk cargo inbound messages to the customs and cargo owners.
7.2.15
The bulk cargo terminal passes the EDI center to deliver bulk cargo shipment messages to customs and cargo owners.
7.2.16
The bulk cargo terminal passes through the EDI center to deliver the operation plan message to the customs.
7.2.17
The cargo owner or freight forwarder passes the EDI center to the railway department to transmit (train) monthly plan application messages.
7.2.18
The cargo owner or freight forwarder passes the EDI center to the railway department to transmit (train) daily plan application messages.
7.2.19
Through the EDI center, the railway department transmits the (train) monthly plan application approval message to the freight forwarder or its cargo owner.
7.2.20
The railway department passes the EDI center to the freight forwarder or its cargo owner to deliver the (train) daily plan application approval message.
7.2.21
The cargo owner or freight forwarder passes the EDI center to the railway department to transfer the container loading message to the railway department.
7.2.22
The railway transport carrier passes through the EDI center to transmit the railway waybill message to the transport shipper, shipper, terminal, and inland station.
7.2.23
The train departure station passes the EDI center to deliver the train departure report message to the cargo destination station, shipping agency, and terminal.
7.2.24
The train departure station passes the EDI center to deliver the train arrival report message to the cargo destination station, freight forwarder, tally and terminal.
7.2.25
Through the EDI center, the railway department transmits train information messages to the freight forwarders or their cargo owners.
7.2.26
Wharf and railway port station pass EDI center to deliver loading and unloading messages to freight forwarders or their cargo owners.
7.2.27
Through the EDI center, the railway department transmits electronic messages of railway train delivery and marshalling to wharf, MTR, and railway port stations.
7.2.28
Through the EDI center, the railway department transmits (railway assembly) stops to transport shi...
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38567-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38567-2020
$145.00