Valid

GB/T 38446-2020Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films (English PDF)

微机电系统(MEMS)技术 带状薄膜抗拉性能的试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38446-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 6, 2020

Implementation date

October 1, 2020

Scope

GB/T 38446-2020 is the English-translated version of 微机电系统(MEMS)技术 带状薄膜抗拉性能的试验方法.

GB/T 38446-2020 is the Chinese standard "Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films". Its scope clause reads: This standard specifies the test method and data processing of the tensile properties of the ribbon film.

This standard applies to samples with a thickness between 50nm and a few microns and a ratio of length to thickness greater than 300. It can also be used for MEMS Quality control of the product film structure. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38446-2020

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Test method
  • 5 Data processing
  • Appendix A (informative appendix) Sample preparation using MEMS process
  • Appendix B (informative appendix) The effect of alignment deviation and geometry on performance testing
  • Appendix C (informative appendix) Test result error and compensation of the nano-indenter

1 Scope

This standard specifies the test method and data processing of the tensile properties of the ribbon film.

This standard applies to samples with a thickness between 50nm and a few microns and a ratio of length to thickness greater than 300. It can also be used for MEMS Quality control of the product film structure.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 26111 Technical terms for microelectromechanical system (MEMS)

3 Terms and definitions

The terms and definitions defined in GB/T 26111 and the following apply to this document.

3.1 Modulus of elasticity

When the material is in the stage of elastic deformation, the ratio of stress to strain.

Note. Rewrite GB/T 3102.3-1993, definition 3.18.1.

3.2 Yield strength

Re

When the material exhibits a yielding phenomenon, the stress point at which plastic deformation occurs and the force does not increase during the test is reached.

Note 1. Rewrite GB/T 228.1-2010, definition 3.10.2.

Note 2. For materials with obvious yield phenomena, the yield strength is the stress at the yield limit of the material when the yield phenomenon occurs; for materials where the yield phenomenon is not obvious,

The yield strength is the stress when the strain reaches 0.2% of the residual strain.

3.3 Tensile strength

Rm

The corresponding maximum stress during the material breaking process.

Note. Rewrite GB/T 228.1-2010, definition 3.10.1.

3.4 Deflection

The linear displacement of the sample structure axis in the direction perpendicular to the axis or the linear displacement of the midplane in the direction perpendicular to the midplane.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38446-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38446-2020

$105.00