GB/T 38385-2019Determination of disperse yellow 23 and disperse orange 149 dyes in dye products (English PDF)
染料产品中分散黄23和分散橙149染料的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38385-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
November 1, 2020
Scope
GB/T 38385-2019 is the English-translated version of 染料产品中分散黄23和分散橙149染料的测定.
GB/T 38385-2019 is the Chinese standard "Determination of disperse yellow 23 and disperse orange 149 dyes in dye products". Its scope clause reads: This standard specifies the determination methods of disperse yellow 23 and disperse orange 149 dyes in dye products.
This standard is applicable to dye products of all dosage forms. See Annex A for chemical information of disperse yellow 23 and disperse orange 149 dyes. Its clauses include principle; general requirements; reagents and materials; apparatus; test conditions.
Found what you need?
Document preview — GB/T 38385-2019
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 General requirements
- 5 Reagents and materials
- 6 Apparatus
- 7 Test conditions
- 8 Test procedures
- 9 Result calculation
- 10 Chromatogram
- 11 Minimum detection limit, precision and recovery rate
- 12 Test report
- Annex A (Normative) Chemical information of disperse yellow 23 and disperse orange
1 Scope
This standard specifies the determination methods of disperse yellow 23 and disperse orange 149 dyes in dye products.
This standard is applicable to dye products of all dosage forms.
See Annex A for chemical information of disperse yellow 23 and disperse orange 149 dyes.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of limiting values
3 Principle
Extract disperse yellow 23 and disperse orange 149 in dyes with methanol as solvent, separate and qualitatively determine the extracting solution using the high performance liquid chromatography-diode array detector method, and then quantify using the peak area external standard method. Qualitatively determine the detected and uncertain samples using the high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method.
4 General requirements
Unless otherwise specified, only recognized analytically pure reagents and Grade-III water (specified in GB/T 6682-2008) shall be adopted. The inspection result shall be judged according to the rounding-off value comparison method specified in 4.3.3, GB/T 8170-2008.
5 Reagents and materials
5.1
Standard disperse yellow 23 and disperse orange 149 dyes.
5.2 Acetonitrile
chromatographically pure.
5.3 Methanol
chromatographically pure.
5.4
Phosphoric acid.
5.5 Water
filtered with 0.45µm water phase membrane.
5.6 PTFE filter head (pin type filter)
0.45µm.
6 Apparatus
6.1 Liquid chromatograph
infusion pump - with a flow range of 0.1~5.0mL/min, in which the flow stability is ±1%; with a diode array detector (DAD).
6.2 Chromatographic column
a stainless steel column with a length of 150mm and an inner diameter of 4.6mm, with a stationary phase of C18 whose particle size is 5µm.
6.3
Chromatographic working station or integrator.
6.4
Blunt micro-injector or automatic sample injector.
6.5
Ultrasonic generator.
7 Test conditions
7.1 Liquid chromatographic analysis conditions
7.1.1 Flow rate
0.8mL/min.
7.1.2 Column temperature
40°C.
7.1.3 Detection wavelength
200~600nm.
7.1.4 Quantitative wavelength
380nm, 460nm.
7.1.5 Injection volume
20µL.
7.1.6 Mobile phase
organic phase A - - acetonitrile; aqueous phase B - - 0.1% phosphoric acid solution.
See Table 1 for mobile phase gradient procedure.
Table 1 Mobile phase gradient procedure
Time/min Mobile phase A/% Mobile phase B/%
0 30 70
3 30 70
5 70 30
30 70 30
32 30 70
40 30 70
As the test result depends on the instruments adopted, it is impossible to provide the general parameters for chromatographic analysis. The above parameters are proved applicable to the test.
7.2 Parameters of liquid chromatography-mass spectrometer (LC-MS/MS) method
7.2.1 Chromatographic column
a stainless steel column with a length of 50mm and an inner diameter of 2.0mm, a stationary phase of C18 whose particle size is 4.0µm.
7.2.2 Flow rate
0.6mL/min.
7.2.3 Column temperature
40°C.
7.2.4 Detector
mass selective detector.
7.2.5 Injection volume
5µL.
7.2.6 Mobile phase
organic phase A - - acetonitrile; aqueous phase B - - 0.1% phosphoric acid solution.
See Table 2 for mobile phase gradient procedure.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38385-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38385-2019
$165.00