Valid

GB/T 38369-2019Directional vibratory roller (English PDF)

定向振动压路机

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38369-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2019

Implementation date

July 1, 2020

Scope

GB/T 38369-2019 is the English-translated version of 定向振动压路机.

GB/T 38369-2019 is the Chinese standard "Directional vibratory roller". Its scope clause reads: This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, directional vibration rollers (hereinafter referred to as rollers), Marking, packaging, transportation and storage. This standard applies to directional vibration rollers.

Found what you need?

Document preview — GB/T 38369-2019

National Standard of the People's Republic of China

ICS
53.100
Classification
P 97

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword I
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification
  • 5 Requirement
  • 6 Test method
  • 7 Inspection rules
  • 8 Marking, packaging, transport and storage
  • Appendix A (Informative) Test Record Table 13 for Directional Vibratory Rollers
  • Appendix B (informative appendix) Roller reliability test record table
  • Appendix C (Normative Appendix) Reliability Test Failure Classification

1 Scope

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, directional vibration rollers (hereinafter referred to as rollers),

Marking, packaging, transportation and storage.

This standard applies to directional vibration rollers.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 7920.5 Terms and commercial specifications for earth moving rollers and backfill compactors

GB/T 8595 Earthmoving machinery driver control device

GB/T 10913 Determination of traveling speed of earthmoving machinery

GB/T 14039-2002 Code for pollution degree of solid particles in hydraulic transmission oil

GB 16710 Earthmoving machinery noise limit

GB/T 16937 Field test methods and performance criteria for earthmoving machinery drivers

GB/T 18148 Test method for compaction performance of earthmoving machinery compaction

GB/T 18826 Industrial 1,1,1,2-tetrafluoroethane (HFC-134a)

GB/T 20082 Method for measuring particle contamination by optical microscope with liquid pollution of hydraulic transmission

GB .20178 General rules for safety labels for earthmoving machinery

GB 20891 Emission Limits and Measurement Methods of Exhaust Pollutants for Diesel Engines for Non-Road Mobile Machinery (China's Third and Fourth Stages)

GB/T 21152 Performance requirements and test methods for earthmoving machinery wheeled or high speed rubber tracked machine braking systems

GB/T 22358 Earthmoving machinery protection and storage

GB/T 25602 earthmoving machinery availability terms

GB/T 25606 Identification code system for earthmoving machinery products

GB/T 25614 Determination of sound power level of earth moving machinery-Dynamic test conditions

GB/T 25615 Measurement of sound pressure level for position emission of earthmoving machinery drivers-Dynamic test conditions

GB 25684.1 Safety of earthmoving machinery-Part 1. General requirements

GB 25684.13 Safety of earthmoving machinery-Part 13. Requirements for rollers

JB/T 5945 General technical conditions for engineering machinery assembly

JB/T 5946 General technical conditions for painting of construction machinery

JB/T 5947 General technical conditions for construction machinery packaging

JB/T 9725 Modeling method of earthmoving machinery products

JG/T 5076.2 Inspection Specification for Vibration Roller Damping System

ISO 11500 Automatic Transmission of Particles in Liquid Samples Using the Extinction Principle for Hydraulic Transmissions to Determine Particle Contamination (Hydraulic fluidpower-Determinationoftheparticulatecontaminationlevelofaliquidsamplebyautomaticpar- ticlecountingusingthelight-extinctionprinciple) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38369-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38369-2019

$445.00